MTD Edger Belts

MTD Edger Lawn Mower Ground Drive Belt

★★★★★

★★★★★

1 Review

This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measuring 3L x 35.80 inches, this belt is sold individually. A wrench may be needed for installation, depending on your equipment model.

MTD Edger Belt This belt is a genuine Troy-Bilt replacement part, it is not an aftermarket alternative. It is a high quality item designed for use with edgers. This is the main belt that drives the blade. Over time belts tend to wear out and stretch eventually requiring replacement. Please note, one rubber belt is included per order. To complete this repair you will need a set of wrenches. Always clean the pulleys before installing the new belt.

MTD Edger Snow Blower Belt This is a genuine Craftsman part for use with Snow Blowers and Lawn Mowers. The ground drive belt drives the transmission, which propels the lawn mower wheels. The most common reason for replacing the drive belt is when the lawn mower wheels won't turn. This part is sold individually. The tools that you will need to replace the drive belt is a 5/8 inch socket and a pipe wrench.

MTD Edger Belt-3v-31.2 This is a genuine OEM sourced replacement part that is intended to be used with edgers from MTD, Cub Cadet, Yard Machines, Troy-Bilt, and Yard-Man. The v-belt attaches to the engine pulley, and the blade pulley. This item links motor and blade to allow the motor drive shaft to rotate the blade. This item is sold as an individual replacement part.

MTD Edger Belt This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with lawn edgers. The special belt is used to link the motor drive shaft and the blade pulley to allow the blade to rotate with the shaft. This item is available as an individual replacement part.

MTD Edger Belt-v 1/2 X 38.7 This is a genuine part which is supplied directly by the original equipment manufacturer and is used with MTD edgers. The V-belt connects the engine pulley to the transmission pulley to propel the unit forward. This part is made of rubber and is sold individually. For this repair you will need a screwdriver, a socket wrench, and a pair of needle nose pliers to aid you. Be sure to remove the spark plug and boot on the unit to avoid premature starting.

MTD Edger 'v'-belt

MTD Edger Belt-v 3/8 X 38 Sl This is an authentic MTD replacement part that has been sourced from the original manufacturer to be used with trimmers, edgers, snowthrowers, and tillers. The special belt is commonly used to connect a motor or drive pulley to part assembly or driven pulley to actuate a rotating part structure. This belt is used with several different types machines, please see you model's part diagram for part usage and compatibility.

MTD Edger Belt-v 1/2 X 31