Log Splitter Hoses and Tubes

Log Splitter Hose-breather A breather hose is used within the ventilation system for a crankcase, or engine, to connect the crankcase to the air manifold and allow hot air to escape. This genuine OEM breather hose is made of a high-quality rubber and is designed for use and compatible with several different makes and types of outdoor power equipment, such as lawnmowers, tillers, engines, log splitters, and snowblowers. Due to the build material of this hose, it can break down over time and through exposure to gas, oil and excessive heat. If you notice any damage on the hose, fuel leaks or worsened engine performance resulting in rough idling or stalling, this hose may be damaged or simply need replacing. To replace this hose, locate the hose on your model and remove any clamps, before pulling off the old hose and installing the new, with any necessary hardware such as clamps.

Log Splitter Snow Blower Nipple Fuel Tank The fuel tank nipple, also referred to as a fitting, connects the fuel tank of your lawn equipment to its engine fuel line, allowing fuel to reach the engine. If you observe fuel leaks or a loose connection, the nipple may be damaged and requires replacement. When removing the old fuel tank nipple, ensure the tank is empty and the engine is turned off. Use a wrench or pliers to detach the nipple. This high-quality OEM replacement part is sold individually.

Log Splitter Kit-fuel Line This is an authentic MTD replacement part. The fuel line kit is designed by the manufacturer for use in snowblowers. This part includes the rubber tube and two metal clamps, and is used to carry fuel through the machine. You will require pliers when replacing these items.

Log Splitter Hydraulic Fitting This high-pressure hydraulic fitting is designed for use on heavy-duty log splitters to help maintain reliable hydraulic system operation. Built for durability under demanding conditions, it provides a secure connection that supports proper fluid flow and consistent performance. It’s a practical replacement option for restoring hydraulic system integrity and dependable splitter operation.

Log Splitter Nipple-pipe This is an authentic replacement part, sourced from the original manufacturer for use with hydraulic log splitters. The metal nipple pipe is commonly used to link the hydraulic cylinder and the control valve. This nipple pipe is available as an individual replacement part, please see model diagram for associative parts.

Log Splitter Oil Fill Tube Asse This is an authentic replacement part, sourced from the original manufacturer for use with outdoor power equipment. The plastic tube is commonly used to guide engine oil into the oil tank when adding oil to the engine. This fill tube is available as an individual replacement part.

Log Splitter Hose-return

Log Splitter Hose-hydraulic

Log Splitter Hose:inlet:logsplt

Log Splitter Hose-hydraulic 48