Lawn Tractor Ignitions

This is a genuine replacement part sourced directly from manufacturer. It is designed for use with riding lawn mowers/tractors. The ignition key is inserted into the switch to start the mower. This is a safety feature for unauthorized use of the mower. This part is made out of plastic with metal and it is sold individually.

This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental or unauthorized use of the equipment. A broken key might be loose or hard to turn. In some cases, it might have completely fallen out of the switch. Without the ignition key, it will be difficult or impossible to start the engine. Locate your ignition key by reading your user manual. To remove a stuck ignition key, you may need to use a small amount of lubricant on it. While turning the key in the ignition switch, gently wriggle it back and forth. There may also be a release button that you could press, depending on your model type. This replacement part is an OEM product and is sold per unit.

This is a genuine replacement part which is sourced directly from the original equipment manufacturer for use with Craftsman riding lawn mowers. The ignition key is inserted into the switch to start the mower, it is a safety feature to prevent unauthorized use of the mower. This part is made of high-quality plastic with metal and it is sold individually.

This is a genuine OEM sourced replacement part which is specially designed for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. The ignition module also known as armature-magneto provides current for the ignition system by producing pulses of high voltage for the spark plugs. Over time components may wear out and begin to fail eventually requiring a replacement to maintain a properly functioning equipment. Keep in mind this high-quality ignition module is sold as an individual item. A wrench set will be needed to perform this repair.

Hard starting or an engine that suddenly stops may point to a damaged magneto armature. This ignition coil turns magnetic energy from the spinning flywheel into the electrical pulse that fires the spark plug. First try a known-good spark plug and inspect the safety switches, grounding wire, terminals, and flywheel magnet. Confirm fit from the full engine identification numbers, since similar coils may mount differently. Work only with the engine off and cool. Disconnect the battery and spark plug lead before removing covers. During installation, use the air gap listed in the service manual and tighten the mounting screws evenly. Keep hands clear of the flywheel and use an insulated tester to check for spark.

This magneto, also known as an ignition coil, is a genuine OEM replacement part for outdoor power equipment. It generates the spark needed to ignite the air-fuel mixture in the engine’s combustion chamber, ensuring smooth and reliable operation. Over time, the magneto may fail due to worn wiring, damage to the spark plug lead, or incorrect gapping between the coil and flywheel. Symptoms of a faulty magneto include misfiring, hard starting, and poor performance. Installation involves removing the spark plug for safety, accessing the flywheel, and setting the correct gap with a feeler gauge before securing the new part.

Ignition coil 595304 is an original equipment manufacturer (OEM) part that fits Briggs & Stratton lawn and garden equipment engine models 31R907-0018-G1, 33R877-0002-G1, 33R877-0009-G1 and 33S877-0015-G1. Ignition coil 595304 generates the voltage for the spark plug. Set the ignition coil air gap at 10/1000-in to 14/1000-in. Torque the ignition coil screws to 30-lb-in.

This is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The ignition module is designed to deliver pulses of high voltage to the spark plug, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Unfortunately, over time, components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually.

This molded ignition key is sourced directly from the original equipment manufacturer for use with lawn mowers and garden tractors. This is a safety feature to prevent any unauthorized use of the mower. The key is inserted into the ignition switch allowing the user to start the unit. If the part is missing or is damaged, this component will provide an identical replacement. Keep in mind this high-quality molded key is sold as an individual item. Refer to the owner's manual for your model to ensure the correct application.

Key-ignition indak