Lawn Mower Valves

The oil drain valve connects to the easy oil tube drain and the oil pan and helps to drain the oil out of the engine. This part is made out of metal and is available individually. It will need to be replaced if it becomes broken and a set of pliers may be needed when replacing this part. This valve is an original part from Ryobi and Husqvarna for use in ride lawn mowers and lawn tractors.

The valve fuel check fits between the hose clamp and the grommet check valve. This is an authentic part from Husqvarna, Poulan, and Jonsered for use in zero turn lawn mowers. It is sold individually and is made out of plastic. A set of pliers and a socket set might be helpful during the installation of this part. This part may break and will need to be replaced.

This is a geniune OEM part. The Briggs & Stratton, 10-16 amp voltage regulator is composed of metal, wiring and plastic parts. The regulator is compatible with many lawn and garden machines. This part is connected to the engine's terminals, and has been designed to manage the voltage in the device's electrical system. A screwdriver and a socket set are needed in making the removal and repair. It is recommended to refer to the manual and diagrams for repair instructions. This item is sold individually.

This is an authentic OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The shut-off valve attaches to the bottom of the fuel tank and is used to link the fuel line and to control the flow of fuel that goes to the engine. This item is available as an individual replacement part.

Sold as a kit, including the Rectifier and the Mounting Hardware, this Rectifier Regulator Kit is sourced directly from the original equipment manufacturer. The Rectifier Regulator is responsible for converting AC power to DC and regulates how much electricity is delivered to the battery. When malfunctioning, it can cause your battery to have less or no power. In some cases, it can cause your battery to have too much power, damaging the internal plates of the battery. You will need a screwdriver and a nut driver to complete this repair. Customers rate this repair as Easy.

This part is an OEM from Kohler. The exhaust valve (std.) is composed of high-quality metal, and is compatible with many small engines. This part is fitted into the cylinder head assembly. The charged fuel moves through the exhaust valve to the manifold. This item is sold individually. A wrench is often needed in making the repair.

This is a genuine OEM part that is intended to be used with lawnmower engines from Briggs & Stratton, Toro, and Murray. The valve attaches to the incoming fuel line and is used to regulate the flow of fuel that enters the engine. This item is available as an individual replacement part.

This Husqvarna safety decal is a replacement warning label designed to provide clear, factory-approved operating instructions and hazard alerts for outdoor power equipment. Made from durable, weather-resistant vinyl with an adhesive backing, it is built to remain securely in place and highly visible on the machine’s fender or chassis area. The decal helps promote safe operation by reminding users of key precautions and guidelines, making it an essential replacement for worn, faded, or damaged labels on riding mowers and lawn tractors.

The float valve is used to allow fuel into the float chamber when the chamber has been drained and to stop fuel from entering the chamber when it is full. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. This authentic part is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model to ensure the correct repair procedure. Keep in mind this high-quality valve-fuel inlet is sold as an individual item.