My Orders
LG Range Motors
GET YOUR OFFICIAL LG PARTS TO ENSURE VICTORY
Popular LG Range Motors
This genuine OEM convection fan motor powers the fan that circulates hot air evenly throughout the oven cavity, ensuring consistent temperatures and uniform cooking and baking. This motor is typically located at the back of your oven, behind a protective panel, where it drives the convection fan. If the motor is broken, you might notice uneven cooking or baking, longer cooking times, or a lack of air movement inside your oven. Please keep in mind that this fan motor is sold separately from the fan blade.
This genuine OEM convection fan motor powers the fan that circulates hot air evenly throughout the oven cavity, ensuring consistent temperatures and uniform cooking and baking. This motor is typically located at the back of your oven, behind a protective panel, where it drives the convection fan. If the motor is broken, you might notice uneven cooking or baking, longer cooking times, or a lack of air movement inside your oven. Please keep in mind that this fan motor is sold separately from the fan blade.
Installation Instructions
Barry from PIERRE, SD
Convection Fan stopped working, would spin but not continuously on its own
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go.
... Read more
Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Read less
If the turntable on your microwave does not rotate, or you can hear a grinding noise, the problem may be with the motor. The motor is typically located below the floor of the oven, and is accessed through the bottom. The motor is normally held in place with a retaining screw and will have two wires attached to it as well. If the motor is making a grinding noise it will need to be replaced. If the motor does not turn, you can check for voltage or continuity with a multi-meter. Make sure the power is disconnected from your microwave before beginning this repair.
If the turntable on your microwave does not rotate, or you can hear a grinding noise, the problem may be with the motor. The motor is typically located below the floor of the oven, and is accessed through the bottom. The motor is normally held in place with a retaining screw and will have two wires attached to it as well. If the motor is making a grinding noise it will need to be replaced. If the motor does not turn, you can check for voltage or continuity with a multi-meter. Make sure the power is disconnected from your microwave before beginning this repair.
Installation Instructions
Susan from HENDERSON, NV
microwave dish would not move back and forth
unscrewed the bottom of the microwave and unplugged old part then took the screw out and put new one in. Super easy!
This AC synchronous motor is a genuine OEM replacement part specially made for microwaves. It operates on an alternating current, and it is responsible for rotating the turntable to ensure even heating of your food. The motor can fail due to physical damage or malfunctioning internal components such as the bearings. If your turntable is not rotating, you will need to replace the motor. You can find it underneath the microwave cavity, near the center. Disconnect the microwave from the power source and remove the cover. Turn the microwave over and remove the bottom panel to access the motor. Disconnect the motor from its mounting location, and then insert the new motor in its place. Ensure the new motor is securely attached before reassembling the appliance.
This AC synchronous motor is a genuine OEM replacement part specially made for microwaves. It operates on an alternating current, and it is responsible for rotating the turntable to ensure even heating of your food. The motor can fail due to physical damage or malfunctioning internal components such as the bearings. If your turntable is not rotating, you will need to replace the motor. You can find it underneath the microwave cavity, near the center. Disconnect the microwave from the power source and remove the cover. Turn the microwave over and remove the bottom panel to access the motor. Disconnect the motor from its mounting location, and then insert the new motor in its place. Ensure the new motor is securely attached before reassembling the appliance.
Installation Instructions
Steven from Oak Forest, IL
Motor Burned Out On Turntable
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No tri
... Read more
p to home depot today.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This AC fan motor drives airflow through the appliance to help regulate temperature and maintain efficient operation. Built for dependable performance, it supports consistent air circulation and system stability.
This AC fan motor drives airflow through the appliance to help regulate temperature and maintain efficient operation. Built for dependable performance, it supports consistent air circulation and system stability.
Installation Instructions
Charles from TARPON SPGS, FL
Turntable stopped turning, tray stopped moving back and forth, and microwave made odd noises.
Unplugged power cord. Unscrewed six screws and removed bottom of microwave, unplugged wire from motor, unscrewed two screws holding motor, replaced with new motor. Put everything back in place, plugged it back in, and it worked good as new.
This convection fan motor is designed for use within various models of ranges/ovens and is a genuine OEM part. It heats the inside of the appliance through the use of a fan and the airflow it creates. This fan motor comes as an individual part without the attaching fan or hardware to secure it. If you hear scraping and scratching noises coming from the fan assembly at the rear of the range, or if the fan is not rotating, this motor is likely damaged or worn-out and in need of replacement. Failure to do so will result in poor heating throughout your range and generally poor performance throughout. To replace this fan motor, you will need a screwdriver and wrench and will need to first disconnect your range from power. Then you can pull the range out from the wall and remove its rear panel. Disconnect the wires connected to the fan motor terminals and remove the securing hardware for the fan motor, which can now be replaced with the new fan motor. Reassemble the rest of the rear panel and connect your range back to power and test the fan motor.
This convection fan motor is designed for use within various models of ranges/ovens and is a genuine OEM part. It heats the inside of the appliance through the use of a fan and the airflow it creates. This fan motor comes as an individual part without the attaching fan or hardware to secure it. If you hear scraping and scratching noises coming from the fan assembly at the rear of the range, or if the fan is not rotating, this motor is likely damaged or worn-out and in need of replacement. Failure to do so will result in poor heating throughout your range and generally poor performance throughout. To replace this fan motor, you will need a screwdriver and wrench and will need to first disconnect your range from power. Then you can pull the range out from the wall and remove its rear panel. Disconnect the wires connected to the fan motor terminals and remove the securing hardware for the fan motor, which can now be replaced with the new fan motor. Reassemble the rest of the rear panel and connect your range back to power and test the fan motor.
Installation Instructions
joseph from ROCHESTER, NY
turntable stopped turning
removed filters (2) beneath microwave, took turntable glass dish and roller track out of microwave, pulled up on turntable drive triangle peg to disconnect it from drive motor under the microwave. Removed 7 Philips head screws that hold the light assembly and filters in place, then lowered the assembly plate down to expose the wire harnes
... Read more
ses for the drive motor and the lights. Disconnected the wire harness plug fron the motor and unscrewed two screws holding the motor in place.
Assembly is the reverse of disassembly.
Assembly is the reverse of disassembly.
Read less
