My Orders
KitchenAid Blender Hardware
GET YOUR OFFICIAL KitchenAid PARTS TO ENSURE VICTORY
Popular KitchenAid Blender Hardware
Installation Instructions
Gerard from E FALMOUTH, MA
Door handle broken
I followed the instructions you already have in
your information. I had no problem using them
for my fix. Delivery of parts arrived very quickly
and there was no down time for the dryer.
your information. I had no problem using them
for my fix. Delivery of parts arrived very quickly
and there was no down time for the dryer.
Sold individually.
Sold individually.
Installation Instructions
Charles from Brooklyn, NY
Water leaking out under door
The pump outlet gasket was sticking out and a screw was missing from the pump outlet housing. This was causing water to flood out under the door.
Once I removed the pump outlet housing I saw that the gasket was out of place almost all the way around. I cleaned around the housing, replaced the gasket and the missing screw.
... Read more
You need a Torx T-15 for this repair. Note that all of the screws on the housing were loose so you might need to tighten them from time to time.
Be careful not to drip a screw when you are installing it since it's a real hassle to fish it out from under the screen.
Once everything was tightened up, the wash pressure seemed to be much higher.
Once I removed the pump outlet housing I saw that the gasket was out of place almost all the way around. I cleaned around the housing, replaced the gasket and the missing screw.
... Read more
You need a Torx T-15 for this repair. Note that all of the screws on the housing were loose so you might need to tighten them from time to time.
Be careful not to drip a screw when you are installing it since it's a real hassle to fish it out from under the screen.
Once everything was tightened up, the wash pressure seemed to be much higher.
Read less
Introducing the Whirlpool Collar with Cutting Blade, a genuine OEM part specifically designed for some models of Whirlpool blenders and mixers. This high-quality piece is integral for the functionality of your kitchen appliances, rotating seamlessly at the base of the container to optimally blend or chop food. To assure perfect compatibility with your appliance, please consult your owner's manual before installation. This kitchen component is expertly crafted to uphold the Whirlpool commitment to performance, value, and style. Stay ahead in your kitchen game with this Whirlpool Collar with Cutting Blade.
Introducing the Whirlpool Collar with Cutting Blade, a genuine OEM part specifically designed for some models of Whirlpool blenders and mixers. This high-quality piece is integral for the functionality of your kitchen appliances, rotating seamlessly at the base of the container to optimally blend or chop food. To assure perfect compatibility with your appliance, please consult your owner's manual before installation. This kitchen component is expertly crafted to uphold the Whirlpool commitment to performance, value, and style. Stay ahead in your kitchen game with this Whirlpool Collar with Cutting Blade.
Installation Instructions
cesar from saugus, CA
Leaking base and silicone seal
Just swapped out parts and no more leak. I figured out the leak was around the blades and the nut holding it together wasn't staying tight. New parts fit perfect. No tools.
Sold individually.
Sold individually.
Installation Instructions
Michael from Tomahawk, WI
Gears ground when roller attachment applied.
Took screw off band. This revealed 4 screws to upper housing. Removed 4 screws and lifted upper housing off . To my surprise I found no screws holding gear housing cover in place. You could tell they were there at one time. Should be 4. I removed cover disasembled what was left of gears. Cleaned old grease ordered parts. Thought since the
... Read more
re was only 1 screw on diagram it would ship 4. No big deal. After recieving parts further inspection revealed no screws holding motor in place. This blows me away. Anyway off to local hardware store for more screws. Got home slapped it togethere in 10 minutes. Ordered this off TV about 6 years ago. They must have had it in for repair and forgot to put it back together. All that aside it runs better than ever. Thanks much Michael
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Sold individually.
Sold individually.
This part includes the blades.
This part includes the blades.
Installation Instructions
NARDIS from DORAL, FL
Change of collar Kitchenaid's Blender
Just unscrew the jar from the collar and screw the new collar with the jar aagain.
This screw is sold individually.
This screw is sold individually.
Installation Instructions
Joseph from Baldwin, NY
dryer did not shut off no heat
took control pannel apart removed timer took new timer and replaced wire for wire the mounted new timer . removed old buzzer and replced wire for wire then mounted new buzzer screw was just in case I lost or stripped old one not needed . reassembled control pannel ,tested and found I needed more parts no heat so I opened the bottom and I
... Read more
ordered Igniter, sensor ,and thermostat and new coil kit . now i have heat but thermostat is back ordered timer works but not on regular auto dry but I do have heat ?? it has to be thermostat . now all the repair was relitivly easy but you had to watch and be carefull of what you were doing . when thermostat comes in I hope that will solve all the problems if not
Read less