My Orders
Kenmore Furnace Hardware
GET YOUR OFFICIAL Kenmore PARTS TO ENSURE VICTORY
Shop By Part Type
View MorePopular Kenmore Furnace Hardware
Sold individually.
Sold individually.
Installation Instructions
Peter from WRENTHAM, MA
Kenmore 80 Series Washer - Agitator Stopped Working
First I screamed at the ceiling, because I have a three year old and an infant, and the washing machine was dead. Then I went to youtube. It seemed like the "agitator dogs" were the issue.
In this spirit of any repair, I replaced them, and it was not the issue. I don't know what I expected.
Ceiling. YouTube. Pacing ... Read more .
Then I figured it was this part - the motor coupling. I unplugged the machine and took out the drain tube. I leaned the machine back and propped it up with an empty detergent bottle, because those were abundant. Ratchet off a few bolts and the motor comes out. The coupling was indeed broken. The new one slips right in - I tapped it a few times with a mallet for good measure / vengeance. Ratcheted the bolts back on and tipped it back up.
Pros: Washer works now.
Cons: Everest-esque laundry pile to address.
But hey, it worked! I am no handyman and it wasn't too bad at all. Half hour tops.
In this spirit of any repair, I replaced them, and it was not the issue. I don't know what I expected.
Ceiling. YouTube. Pacing ... Read more .
Then I figured it was this part - the motor coupling. I unplugged the machine and took out the drain tube. I leaned the machine back and propped it up with an empty detergent bottle, because those were abundant. Ratchet off a few bolts and the motor comes out. The coupling was indeed broken. The new one slips right in - I tapped it a few times with a mallet for good measure / vengeance. Ratcheted the bolts back on and tipped it back up.
Pros: Washer works now.
Cons: Everest-esque laundry pile to address.
But hey, it worked! I am no handyman and it wasn't too bad at all. Half hour tops.
Read less
This screw is sold individually.
This screw is sold individually.
Installation Instructions
Tana from ANAMOOSE, ND
Safety agitation switch quit
My son-in-law watched the video on the website and fixed it just fine.
This is an OEM part sourced directly from the manufacturer. The screw is commonly found in snowblowers and snowthrowers from Craftsman. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is available as an individual replacement part.
This is an OEM part sourced directly from the manufacturer. The screw is commonly found in snowblowers and snowthrowers from Craftsman. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is available as an individual replacement part.
Capscrew,3/8-16x2.25
Capscrew,3/8-16x2.25
11-16 x 3/4 Sold individually.
11-16 x 3/4 Sold individually.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is an authentic manufacturer-sourced replacement part which is specially made for use with Murray and Snapper lawn and garden equipment. It is a standard hardware which may have multiple applications. Refer to the appropriate diagrams for your model for the correct location and application of this screw. Keep in mind this high-quality part is made of durable metal and is sold individually. A wrench will be needed to secure or remove it.
This is an authentic manufacturer-sourced replacement part which is specially made for use with Murray and Snapper lawn and garden equipment. It is a standard hardware which may have multiple applications. Refer to the appropriate diagrams for your model for the correct location and application of this screw. Keep in mind this high-quality part is made of durable metal and is sold individually. A wrench will be needed to secure or remove it.
This is a genuine OEM sourced replacement part that is intended to be used with riding lawnmowers from Murray and Snapper. The metal hex nut is used with several different types of mowers and the application of the nut can vary based on the model of the mower. This item is sold as an individual replacement part.
This is a genuine OEM sourced replacement part that is intended to be used with riding lawnmowers from Murray and Snapper. The metal hex nut is used with several different types of mowers and the application of the nut can vary based on the model of the mower. This item is sold as an individual replacement part.
Sold individually.
Sold individually.
Installation Instructions
Edward from Easthampton, MA
unbalanced load...knocking sound.
Unbalanced load was creating a knocking sound (as if the clothes load was unbalanced). Dismantled the washer to find that one brackets had rusted out. [FYI: 3 bracket at 120 degree apart (for the 360 degree circle)]. I found that the hole (on the bracket) where the spring holds was gone. Purchased parts. Replaced them (spring, bracket, sc
... Read more
rew). Reassembled washer then ran wash for a cycle. Successful fix.
Read less
$6.40
Special Order
This is an authentic Snapper replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal bolt is used to secure the steering adjustment assembly to the steering support. This item is available as an individual replacement part.
This is an authentic Snapper replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal bolt is used to secure the steering adjustment assembly to the steering support. This item is available as an individual replacement part.