Tappan Appliance Fault Codes

By Steve Ash

Tappan Oven/Range/Stove Fault Codes

Note: Depending upon the brand of appliance, there can be many different names for the 'clock' component. Electronic Range Control, ERC, Electronic Oven Control, EOC, control board, and clock all refer to the same part.

• F0 - Oven Control Failure - Replace control board (clock).
• F1 - Oven Control Failure - Replace control board (clock).
• F2 - Oven Temperature Too Hot - Check and replace oven temperature sensor (RTD).
• F3 - Open Oven Temperature Sensor (RTD) - Check the connection between the oven control and oven sensor, as well as the sensor harness. If wiring is ok, replace oven temperature sensor (RTD).
• F4 - Shorted Oven Temperature Sensor (RTD) - Check the connection between the oven control and oven sensor, as well as the sensor harness. If wiring is ok, replace oven temperature sensor (RTD).
• F5 - Oven Control Failure - Replace control board (clock).
• F6 - Oven Control Failure - Replace control board (clock).
• F8 - Oven Door Lock Failure - Check door lock switches and relay.

Click here for more information on other Tappan Parts from PartSelect.com