Jenn-Air Washer Hardware | Replacement Parts & Accessories | PartSelect

Popular Jenn-Air Washer Hardware

Your Price
$5.27
Cover Screw
PartSelect Number PS11740701
Manufacturer Part Number WP308685
Sold individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Peter from WRENTHAM, MA says,

Kenmore 80 Series Washer - Agitator Stopped Working
First I screamed at the ceiling, because I have a three year old and an infant, and the washing machine was dead. Then I went to youtube. It seemed like the "agitator dogs" were the issue.

read more

Your Price
$5.88
Hose Clamp
PartSelect Number PS11743008
Manufacturer Part Number WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Fixes these symptoms
Leaking
Will not stop filling with water


Installation Instructions
jeff from lindenhurst, IL says,

Washing Machine was leaking water
Loosened the hose clamp, removed the injector valve and injector nozzle assembly, replaced both and tightened with new hose clamp. Fixed the problem for less than $20!! Washing machine is 20 years o...read more

Your Price
$5.93
Hose Clamp
PartSelect Number PS11740613
Manufacturer Part Number WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Fixes these symptoms
Leaking


Installation Instructions
Stephen from Laveen, AZ says,

Drive Pump Leaked
It took some trial and error but overall not a difficult project. 1. Take the front covers off. 2. Undo the pully spring to loosen belt 3. Remove belt off idler pulley wheel and free up belt f...read more

Your Price
$5.14
Screw
PartSelect Number PS11740978
Manufacturer Part Number WP3196164
This screw is sold individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Quail Valley from Clive, IA says,

Glass broken on outside oven door
Checked to see that I had all the parts I needed.
Installed bottom door trim then side trim pieces.
Do not tighten screws. Install door handle with top
trim attached over glass. Tighten...read more

Your Price
$5.83
Screw, 8/18 x 3/8
PartSelect Number PS11746840
Manufacturer Part Number WP90767
This screw is sold individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Alexander from Lakeland, FL says,

Broken Dryer Knob
First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wif...read more

Your Price
$5.23
Screw
PartSelect Number PS11747542
Manufacturer Part Number WP98165
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Lynn H from MILL CREEK, WA says,

Hinge pin for drawer lid broke
1. Remove all drawers {3}, shelves {glass 1}, shelf support {1}. 2. Remove two {2} screws from End Cap. 3. Carefully remove End Cap and drawer temperature control part on the back wall keeping...read more

Your Price
$34.66
Glide and Spring Kit
PartSelect Number PS2017149
Manufacturer Part Number 205000
This glide and spring kit contains two three inch springs, four one inch square glides, and two tubes springs. This kit replaces older style round roller glides.
Fixes these symptoms
Burning smell
Noisy
Pumps but will not spin

See more...
Installation Instructions
dominic from weirton, WV says,

The belts were not staying tight enough to agitate properly.
Firstly, remove ac power from washer!
After removing the front panel of the washer (two philips screws), I loosened and removed the plastic motor cover and removed three hex head screws holding t...read more

Your Price
$5.70
Tension Springs -Set of 2
PartSelect Number PS2016844
Manufacturer Part Number 202718
This is a set of 2 tension springs.
Fixes these symptoms
Burning smell
Spins slowly
Will not agitate

See more...
Your Price
$5.54
Screw
PartSelect Number PS11743688
Manufacturer Part Number WP67006380
This screw is sold individually.
Fixes these symptoms
No Symptoms for this part
Screw
PartSelect Number PS11742743
Manufacturer Part Number WP489355
This screw is sold individually.
Fixes these symptoms
No Symptoms for this part