EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

Jenn-Air Trash Compactor Hardware

Popular Jenn-Air Trash Compactor Hardware

Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Single Metallic Shoulder Screw Size 832 X 3\8
PartSelect Number PS11744747
Manufacturer Part Number WP780263
Sold Individually.
Fixes these symptoms
Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Dryer Support Roller Clip
★★★★★
★★★★★
1 Review
PartSelect Number PS11746832
Manufacturer Part Number WP90296
Sold Individually.
Fixes these symptoms
Installation Instructions
randy from simi valley, CA
bad drum rooller bearing
took the top, sides and back removed the drum and replaced the roller roller shaft and drive belt and the belt tensioner Read more...
Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Refrigerator Screw
★★★★★
★★★★★
1 Review
PartSelect Number PS11742754
Manufacturer Part Number WP489478
Sold individually.
Installation Instructions
Michael from Torrance, CA
lower left shelf support was broken
I removed all contents from the lower shelf. I, then removed both of the pull out drawers. Secondly, I removed the lower glass shelf and the glass support tray. At this point all four plastic shelf supports were accessible. I removed the inner screw from all four supports and replaced with four new shelf supports. Then reassembled in reverse order. Very easy to do! Read more...
Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Appliance Screw
PartSelect Number PS11743002
Manufacturer Part Number WP59002061
Sold individually.
Installation Instructions
John from WAKEFIELD, MA
Flames appeared outside of burners
The front burner had a noticible flame coming from the base, so I originally purchased a single burner to replace it (you could see a corroded hole at the bottom). Upon taking the unit apart, I noticed the corrosion was much worse than met the eye. Given the age of the unit and that some parts were already becoming discontinued I decided to gut the whole thing and replace it all.
The burner unit slides out easily and after unscrewing the sides, you have to disconnect the wires from the underside of the igniters. The venturi tubes and igniters then unscrew from the underside of the burners which twist right out of the assembly. Re-Assembly is very intuitive looking at it and it all goes right back together as it came out. Took 45 minutes total and that includes fighting with some screws that had rusted onto the burner.
Reading some of the previous reviews, current prices are double to triple what other people did the repair for leading me to believe parts won't be available for much longer. Make the repair while you still can!
Read more...
Your Price
$52.67
  In Stock
Jenn-Air Trash Compactor Power Nut Kit
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11747554
Manufacturer Part Number WP9870163
Includes everything pictured above.
Fixes these symptoms
Installation Instructions
Tim from Bigfork, MT
locking nut was stripped
After calling a repair man and being told my appliance was to old for him to repair I discovered your website. I simply entered the model number and a picture of the part I was looking for was easily found. I ordered online and received the replacement parts 5 day's later. I simply swapped out the old locking nuts with the new ones from your website and the repair was complete. What could have been an easy $100 repair cost a fraction of that and the trash compactor is working just fine. Read more...
Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Range Screw
★★★★★
★★★★★
1 Review
PartSelect Number PS11740982
Manufacturer Part Number WP3196175
This screw is sold individually. 8-18 x 3/8
Installation Instructions
J. Dawn from Key West, FL
replacing parts that were beginning to rust from outdoor exposure.
I had no problem. My husband is an engineer, so the repairs went well. The only problem I did have was that one of the parts did not arrive. come to find out that it was on backorder and arrived a day or two after I called. The person I spoke with when I inquired was most helpful and expeditious. All in all, my experience was excellent. Read more...
Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Refrigerator Screw
PartSelect Number PS11742745
Manufacturer Part Number WP489399
This screw is sold individually.
Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Screw
PartSelect Number PS11742701
Manufacturer Part Number WP486754
Sold individually.
Your Price
$47.40
  In Stock
Jenn-Air Trash Compactor Power Nut
★★★★★
★★★★★
6 Reviews
PartSelect Number PS11744741
Manufacturer Part Number WP777533
This part is a power nut, and it is intended to be used in conjunction with trash compactors. The function of this nut is to fasten to the side of the ram where it is threaded. When the power screw rotates, it is fed through the power nut, which pulls the ram down to compress the trash. This part is just over an inch in diameter, and is just one inch thick. This part is white and made entirely of plastic. The reason for needing to replace this part is if your compactor ram gets stuck, or if it does not stop at the end of the compacting cycle.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • See more...
Installation Instructions
Janet W. from Shreveport, LA
Compactor out of line and would not shut off.
Pulled compactor out on a piece of cardboard. Used socket set to take top off and evaluate the problem. Power nut was not holding on one side. We ordered two power nuts. Decided to repair only the unlevel side. Fast and easy and cheaper than a new compactor. Whirlpool compactor is 28 years old and working like a charm. Thanks for the diagram and accessibility to parts. Read more...
Your Price
$7.47
  In Stock
Jenn-Air Trash Compactor Refrigerator Single Hex Head Screw
PartSelect Number PS11742731
Manufacturer Part Number WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
Installation Instructions
Chris from Pompano Beach, FL
Water in bottom of dishwasher
Disconnected power. Shut off water supply. Took off the front, disconnected copper supply line and flexible water line, removed water inlet valve. Took elbow from old inlet valve and put in on new one. Put new valve in, reconnected water lines, put back front panel. Opened water supply, Flipped breaker back on. Done and it worked! Read more...

Related Jenn-Air Trash Compactor Parts