Jancy Parts

This is an authentic Jancy replacement part that has been sourced from the original manufacturer to used with magnetic drill presses. The special handle connects to the frame assembly and is used to provide a grip when moving the drill press. This item is available as an individual replacement part.

This is an manufacturer sourced replacement brush set designed for use with Jancy drill press. This assembly includes two (2) plastic brush caps and two (2) carbon brushes with lead wires and springs attached. Please note brush holders are sold separately. Due to prolonged contact with an armature brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • Remove the brush cap and take out the old brush • Secure the new brush with a cap and test the tool

This is an authentic replacement part manufactured for use with Jancy slugger drills. The spoke handle is threaded and is secured to the hub assembly and used to raise and lower the motor/slide assembly. This spoke handle is sold as an individual replacement part.

This replacement part is designed for use with Jancy power equipment. This item consists of one (1) carbon brush with a lead wire and a spring attached. It is advised to replace both brushes at the same type. Over time brushes will wear down and will need to be replaced. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. You would need a flat-head screwdriver to complete this job. • Remove the brush cap • Remove old brush and replace it with a new one • Re-assemble and test the equipment

These are genuine manufacturer-sourced components that are specially made for use with Jancy sluggers. Carbon brushes are utilized to conduct the current in electric motors. Unfortunately, over time they will wear out and may begin to fail eventually requiring a replacement. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of these parts. Keep in mind this high-quality set includes two durable brushes with attached springs and two plastic caps.

This is an authentic Jancy replacement part that has been sourced from the original manufacturer to be used with metal cutting saws. The metal rod is used to adjust the vise jaw that secures material to the saw's table assembly. This item is available as an individual replacement part.