Inglis Dishwasher Spray Arms | Replacement Parts & Accessories | PartSelect

Popular Inglis Dishwasher Spray Arms

Your Price
$4.73
Upper Spray Arm Mount
PartSelect Number PS11746245
Manufacturer Part Number WP8539324
This upper spray arm mount has been redesigned by the manufacturer, so it not longer requires a clip and screw to be installed. To replace this part, first remove the rack stops from the upper dish rack and pull out the dish rack to work on it. Remove the screw holding the spray arm in place, take off the spray arm and slide out the feeding tube. Flip the rack over to remove the mounting bracket from the mount. Snap the new mount into place and replace the other parts.
Fixes these symptoms
Door won’t close
Leaking
Noisy

See more...
Installation Instructions
Sibyl from Sparta, NJ says,

The top spray arm of my dishwasher broke off in my hand.
I removed the screw holding the spray arm to the bracket. I then put on the new bracket and tightened the screw. The bracket just clips on to the top basket of the washer. Easy as pie....read more

Your Price
$4.87
Lower Sprayarm Nut
PartSelect Number PS11745480
Manufacturer Part Number WP8268873
This spray arm nut is used in dishwashers and works as the retaining nut for the lower dishwasher spray arm. The nut makes sure the lower spray arm is secured to the pump housing. If your spray arm is coming off, or your nut is lost or damaged, replacing the part can be a solution to your problem. Remember to unplug dishwasher from power source and disconnect the water supply before you begin this installation. Refer to the manual provided by the manufacturer for further installation instructions.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
patricia from Chicago, IL says,

Lower sprayarm nut stripped + broken inside Pump outlet
You WILL need a star-tip screwdriver for this COMMON DU915 repair. We already had one.
The plastic "wing" nut which keeps the lower sprayarm attached to the pump assembly cracked inside where the...read more

Your Price
$7.10
Seal, Lower Sprayarm
PartSelect Number PS11741334
Manufacturer Part Number WP3376846
This dishwasher lower spray arm seal, or under spray arm bearing ring, is designed with the split by the manufacturer. It is not damaged or defective, and is sourced directly from the original manufacturer. This part is approximately 2 inches in diameter, made of plastic, and is white in color. This part is mounted underneath the dishwasher spray arm and creates a seal between the lower spray arm and the sump housing. To access the seal, remove lower dish rack and unscrew the nut that secures lower spray arm to the remove cover. No tools are required to replace the lower seal on your dishwasher.
Fixes these symptoms
Leaking
Noisy
Not cleaning dishes properly

See more...
Installation Instructions
James from Jacksonville, FL says,

Dishes not clean and lower wash arm wobbled.
Completely removed lower wash arm and replaced bearing ring and seal....read more

Your Price
$15.67
Wash Arm Bearing Ring
PartSelect Number PS11747064
Manufacturer Part Number WP9742946
This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.
Fixes these symptoms
Leaking
Noisy
Not cleaning dishes properly

See more...
Installation Instructions
James from Jacksonville, FL says,

Dishes not clean and lower wash arm wobbled.
Completely removed lower wash arm and replaced bearing ring and seal....read more

Your Price
$21.24
Spinner Kit
PartSelect Number PS972316
Manufacturer Part Number 8193983
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
paul from erie, CO says,

spinner kept falling off
i removed the top screw for the water input to the spinner, which gave me enough room to replace the worn nipple pin that the spinner snaps on to. then snapped the new spinner in place. and then screw...read more

Your Price
$21.95
Lower Spray Arm
PartSelect Number PS11752743
Manufacturer Part Number WPW10319027
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Patricia from TAMPA, FL says,

The silverware holder, knife must have knocked off arm loose, it then fell and burnt on heater element.
1. Removed the burnt residue left on heating element from the spray arm being knocked off when pulling out the silver ware holder/knife . Step 2: Put the spray arm on and Hand tighten in the correct ...read more

Your Price
$4.87
Spray Arm Seal
PartSelect Number PS11745436
Manufacturer Part Number WP8268340
Also known as a wash arm seal.
Fixes these symptoms
Leaking
Noisy
Not cleaning dishes properly

See more...
Installation Instructions
Fred from Grafton, OH says,

Lower spray arm seal replacement
Remove upper tray and spray arm. Remove two screws retaining pipe for upper spray arm and overhead. Unscrew retainer on top of lower spray arm and remove. Gently rotate the upper feed pipe clockwise u...read more

Your Price
$20.90
Upper Spray Arm
PartSelect Number PS11752696
Manufacturer Part Number WPW10317197
Fixes these symptoms
Not cleaning dishes properly


Your Price
$6.82
Upper Spray Arm Mount
PartSelect Number PS11745466
Manufacturer Part Number WP8268812
This part is used to mount the spray arm to the upper dish rack.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Installation Instructions
Wesley from Lake Elmo, MN says,

Dishwasher not cleaning well... then leaking
This gets a little lengthy... but it explains where Cascade Dishwashing Powder came up with its brand name - it's been a cascade project.
I started by replacing the Middle Wash Arm Tube as the ol...read more

Your Price
$36.78
Spray Arm Mounting Bracket
PartSelect Number PS11741381
Manufacturer Part Number WP3385159
This mount attaches the spray arm to the upper rack.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
ken from elwood, IN says,

Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place....read more