Homelite Chainsaw Parts

This is an authentic OEM sourced replacement primer bulb assembly designed for use with Homelite and Ryobi handheld lawn and garden equipment. This bulb system allows user to get fuel into the carburetor for cold starting. At some time the primer will lose its elasticity or crack requiring replacement. It is made from flexible rubber material in a plastic housing and it is sold individually.

This retaining ring helps hold a related part in place on compatible chainsaws, pole saws, and trimmers. Replace it if the original ring is lost, bent, or damaged, or if the secured part moves out of position. Remove the battery or disconnect the spark plug wire before repair. Check the exact tool model before ordering.

This is a rubber primer bulb with a plastic adapter attachment that is used on a variety of lawn and garden equipment models. This bulb attaches to the carburetor and is used to pump gasoline from the fuel tank into the gas chamber of the carburetor. Over time and through regular use, the primer bulb will lose its elasticity and may crack, requiring it to be replaced. To replace your primer bulb, you simply need to locate the bulb on your machine, unscrew the housing and remove the bulb, and secure the new one. This bulb is sold as an individual part and has a 2.25cm (7/8-inch) outer-diameter and a 3.33cm (1.3125-inch) height.

This fuel filter is a genuine OEM part that is compatible with various lawn equipment models and is sold as an individual part. Fuel filters are used to remove dirt and debris from fuel entering the carburetor and engine and are made of metal with a fabric filter material, meaning this filter will eventually clog and need to be replaced. Please note that the fuel filter should be inspected regularly, not solely when it is clogged. The filter will be attached to the fuel line within the fuel tank and if your equipment is having starting, revving, or idling issues, the fuel filter may be the reason why. To replace it, simply use a hook to pull the old filter out from the fuel tank, use pliers to remove any clamps attached to the end of the fuel line, and pull the filter off. Attach the new filter to the fuel line, along with the clamp, and set the filter back into the tank.

This sprocket is an OEM replacement part for use in chainsaws and pole saws. It is a key component of the chain drive system. The sprocket is a toothed wheel, with a diameter of 1 inch, that is responsible for driving the chain around the bar, allowing it to rotate and cut through materials. It is found at the end of the engine crankshaft. The sprocket can fail if it is inadequately lubricated, if it impacts a hard object, or if its teeth are worn down. A failed sprocket will cause the chain to move slower, slip, or fail to rotate altogether. You will also notice excessive noise and vibration when using your equipment. Therefore, it is important to replace the sprocket to prevent any additional damage to your equipment. Before you begin, ensure that the chain brake is engaged for your safety. Remove the cover on the chainsaw, and pull out the cutting chain and guide bar. Use a sprocket wrench to remove the old sprocket, position the new sprocket onto the crankshaft and secure it with the retaining nut. Each sold individually.

A saw that cuts poorly or leaves fine dust instead of wood chips may need a sharpened or replacement chain. This narrow 10-inch chain is designed for select chainsaws, pole saws, and pruning attachments. Its 40 drive links fit into the guide-bar groove and move around the drive sprocket during operation. Confirm the pitch, gauge, drive-link count, and bar length before ordering. Shut off the tool, remove its battery or spark plug wire, and put on protective gloves before installation. Clean the bar groove, inspect the sprocket, mount the chain in the correct direction, and adjust the tension as directed in the owners manual.

This is a genuine OEM replacement part, it is made out of Metal with Fabric Filter Material. It is sold individually and is used on a variety of Lawn and Garden Equipment. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel getting to the engine so it will need to be replaced.

This high quality replacement chain is specially designed for use with Homelite and Ryobi chainsaws. It is a genuine OEM sourced item, not an aftermarket imitation. This chain is only for use with 14" bars only. Over time chains tend to stretch and become dull requiring replacement. Please note, this metal chain is sold individually. To replace this chain you will need a wrench set and a screwdriver. • Remove the guide bar side panel • Release the chain tension • Remove the old chain • Loosen the tension screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts

Better tool control begins with a front handle that is secure and comfortable to hold. Replace the handle if it is broken, badly worn, or no longer stays firmly in position. Check whether the required screws, clamp, or other mounting pieces are included before ordering. Match the replacement to the full tool model and parts diagram. Disconnect the power source before service, install the handle in the approved position, and test its stability by hand before returning the tool to normal use.