Generator Filters

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is sold Individually. Used on select Intek and Vanguard OHV engines. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This is an OEM Sourced replacement part used on Honda Engines. This Filter is made out of Paper, Foam and Metal. This item is Sold Individually. Its purpose is to filter out dust and debris from contaminating the engine. To replace this you would need a Wrench to remove the Air Cleaner Cover.

This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this can lead to reduced performance. This air filter is approximately 4 inches wide and approximately 5 inches long. To replace the air filter, locate the air filter cover on the side of the engine, unscrew it, and remove the old filter. Be sure to clear out any dirt, clippings, or other debris that has found its way into the air filter assembly before you insert the new filter. Reattach the air filter cover, and secure it with the screws. This product is sold individually.

This replacement oil filter is a high quality item that is specially manufactured for use with Genrac portable generators. It is used to remove harmful contaminants from the engine oil. This part maintains optimum performance of your engine in accordance with applicable EPA emission regulations. It is advised to replace it at least once a season. Please note this authentic oil filter is sold individually.

This is a round, inline fuel filter with 0.25-inch nipples, used in a variety of lawn and garden equipment. It is sourced from the original equipment manufacturer and has the capability to filter out particles as small as 150 microns in size. The filter is designed to remove any dirt or debris in the fuel to avoid contaminating the engine. Over time, it is common for the filter to become clogged with dirt/debris or damaged, resulting in less fuel entering the engine, engine misfiring, stalling, and overall lower performance from your equipment. To replace the faulty fuel filter, first disconnect the fuel lines with pliers or a clamp tool and then pull out the old filter. Install the new filter into the housing and reattach the fuel lines to complete your repair.

This is a genuine OEM approved replacement in-tank fuel filter, it is designed for use with Generac portable generators. The purpose this part is to ensure the fuel that is supplied into the carburetor is free of dirt and any other contaminants. Over time it may get dirty and logged restricting the fuel flow, if the engine is not getting enough fuel, it is time to replace the fuel filter. It is a durable plastic body in-tank fuel filter which is sold individually.

This authentic OEM oil filter is specifically designed for use with Generac portable generators. It plays a vital role in maintaining engine performance by removing harmful contaminants from the engine oil, helping to ensure compliance with EPA emission regulations. For optimal performance, it is recommended to replace the oil filter at least once per season. This item is sold individually. To replace the oil filter, use a filter wrench or pipe wrench to twist the old filter counterclockwise and remove it. Clean the sealing surface on the oil filter adapter to remove any debris or residue. Lightly oil the gasket on the new filter with clean engine oil, then screw it in by hand until the gasket makes contact with the adapter. Finally, tighten the filter an additional half to three-quarters of a turn to ensure a secure seal.

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer's specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

This is a genuine Honda part that is specifically designed for use with Generators. This part is used to keep dirt and debris from entering the carburetor. Regular maintenance of the Air Cleaner Element will help your generator perform at its peak performance. It is recommended that the filter is washed with soap and water especially after being in a dusty location. This is made of a washable foam material and is an individually sold part.

This replacement fuel filter is an authentic OEM part that is specially made for use with Honda engines commonly installed on Toro lawn and garden equipment. The purpose of this part is to filter out dirt and other contaminants from fuel that goes into the carburetor. Over time it may get clogged and restrict the fuel flow eventually requiring replacement. Please note this plastic fuel filter is sold individually.