My Orders
Frigidaire Freezer Ice Makers
GET YOUR OFFICIAL Frigidaire PARTS TO ENSURE VICTORY
Popular Frigidaire Freezer Ice Makers
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
What this part fixes:
- Clicking sound
- Ice maker dispenses too little ice
- Ice maker not making ice
Installation Instructions
Juan from Miami, FL
Broken ice maker
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice.
This refrigerator ice maker assembly includes the ice mold and integrated control mechanism responsible for freezing water and dispensing ice automatically. Designed for compatibility with select models from Frigidaire, Kenmore, Electrolux, Crosley, and others, it replaces older assemblies and restores reliable ice production. Common symptoms indicating the need for replacement include leaking, failure to produce ice, or inconsistent performance. Before installation, disconnect the refrigerator from its power source and verify compatibility using your appliance’s service manual. This assembly offers a dependable solution for restoring full ice-making functionality.
This refrigerator ice maker assembly includes the ice mold and integrated control mechanism responsible for freezing water and dispensing ice automatically. Designed for compatibility with select models from Frigidaire, Kenmore, Electrolux, Crosley, and others, it replaces older assemblies and restores reliable ice production. Common symptoms indicating the need for replacement include leaking, failure to produce ice, or inconsistent performance. Before installation, disconnect the refrigerator from its power source and verify compatibility using your appliance’s service manual. This assembly offers a dependable solution for restoring full ice-making functionality.
Installation Instructions
Richard from N CALDWELL, NJ
Ice maker was not working
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension
... Read more
to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
Read less
This replacement icemaker may also be known as the ice maker assembly and is compatible with your refrigerator/freezer. This assembly replaces the heat-release ice maker unit only. The kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female, and one round male connectors. The tools you will need in order to make this installation include a 1/4-inch nut driver, and a Phillips screwdriver. Before starting this repair make sure to unplug your refrigerator and shut off the water supply.
This replacement icemaker may also be known as the ice maker assembly and is compatible with your refrigerator/freezer. This assembly replaces the heat-release ice maker unit only. The kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female, and one round male connectors. The tools you will need in order to make this installation include a 1/4-inch nut driver, and a Phillips screwdriver. Before starting this repair make sure to unplug your refrigerator and shut off the water supply.
Installation Instructions
JACK from MESA, AZ
Ice Maker Stopped Working
It was pretty straight forward. Remove the two screws that hold the unit to the wall of the freezer. In my case, I had to use a different ice maker than what came with the frig. In order to install the replacement unit they sent a wire adaptor so it would attach to the existing wiring. That too was all fine and dandy. The only p
... Read more
roblem was that the end of the wire adaptor did not fit through the existing hole in the rear of the frig. I used a utility knife to cut through the thin metal lining. That worked just fine. However, I could not cut through the insulation because I could not reach it through the small hole. The excess wire was supposed to be pulled through the hole and out through the back of the unit. So now the excess is between the wall of the freezer and the insulation. The unit is working wonderfully. In fact, it is making more ice than I can use. I am very pleased with the replacement unit. This is the 3rd ice maker that has been in this frig. All the others had a design flaw that had a leak in the rear of the unit. This caused all the ice to form into a big block. The replacement unit has not had this problem so far. Thank you for allowing me to explain my situation so that maybe others may benifit from my experience. Thank you. Jack
Read less
This add-on icemaker assembly is a part for your refrigerator/freezer. The kit includes an icemaker that makes eight radius ice cubes, the water valve, an ice bucket, the fill tube, the harness, and installation instructions. Note: This icemaker assembly will fit most Frigidaire models manufactured from 2001 to present.
This add-on icemaker assembly is a part for your refrigerator/freezer. The kit includes an icemaker that makes eight radius ice cubes, the water valve, an ice bucket, the fill tube, the harness, and installation instructions. Note: This icemaker assembly will fit most Frigidaire models manufactured from 2001 to present.
Installation Instructions
MICHAEL from GEORGETOWN, IN
Bought a new refrigerator. Did not come with an Icemaker.
Remove access cover at bottom of case w/socket wrench (4 screws).
Attach supply line to water valve with adjustable wrench. Attach water line to ice maker on back of case (twist lock) no tools required.
Attach water line from ice maker to water valve (push connection) no tools required. Attache water valve to case at bottom w/on ... Read more e screw. (nut driver)
Reassemble access cover to bottom of case w/socket wrench (4 screws). Remove plastic cover inside freezer (w/screw driver to release from evap cover) to expose ice maker harness connection. Remove two plastic plugs (carefully w screw driver) exposing screw anchors for mounting Ice maker. Assemble two mounting screws w/nut driver. (Do not dtrive all the way in) Plug ice maker harness to plug on back of evap cover.(no tools required) Place cover over harness connection) no tools required. Guide water fill tube into fill cup on ice maker. (no tools required) Hang ice maker on mounting screws. Level Ice maker and tighten screws. (torpedo level makes it easy if you have one handy. Place Ice bucket under Ice maker on freezer shelf (lower position). Turn ice maker on and you are ready to go. Easy Job!!!!
Attach supply line to water valve with adjustable wrench. Attach water line to ice maker on back of case (twist lock) no tools required.
Attach water line from ice maker to water valve (push connection) no tools required. Attache water valve to case at bottom w/on ... Read more e screw. (nut driver)
Reassemble access cover to bottom of case w/socket wrench (4 screws). Remove plastic cover inside freezer (w/screw driver to release from evap cover) to expose ice maker harness connection. Remove two plastic plugs (carefully w screw driver) exposing screw anchors for mounting Ice maker. Assemble two mounting screws w/nut driver. (Do not dtrive all the way in) Plug ice maker harness to plug on back of evap cover.(no tools required) Place cover over harness connection) no tools required. Guide water fill tube into fill cup on ice maker. (no tools required) Hang ice maker on mounting screws. Level Ice maker and tighten screws. (torpedo level makes it easy if you have one handy. Place Ice bucket under Ice maker on freezer shelf (lower position). Turn ice maker on and you are ready to go. Easy Job!!!!
Read less
This ice maker assembly is a genuine OEM component designed to automatically produce and dispense ice cubes through your refrigerator’s freezer section. Working in sync with the appliance’s water supply and cooling system, it efficiently freezes water into uniform cubes for everyday use. Built to exact specifications for a precise fit, this assembly is ideal for restoring functionality when your current ice maker fails to produce ice, leaks water, or makes unusual noises. Installation is straightforward for most DIY repairs, ensuring your refrigerator returns to peak performance quickly.
This ice maker assembly is a genuine OEM component designed to automatically produce and dispense ice cubes through your refrigerator’s freezer section. Working in sync with the appliance’s water supply and cooling system, it efficiently freezes water into uniform cubes for everyday use. Built to exact specifications for a precise fit, this assembly is ideal for restoring functionality when your current ice maker fails to produce ice, leaks water, or makes unusual noises. Installation is straightforward for most DIY repairs, ensuring your refrigerator returns to peak performance quickly.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This ice maker assembly is designed to restore consistent ice production in refrigerator and freezer compartments. Operating at 115V, it includes an ice mold, control device, and a heater guard to support efficient freezing and ejection cycles. The unit receives water from the inlet valve, freezes it in the mold, and then ejects the ice cubes into the storage bin. It continues this cycle until the bin is full, ensuring a reliable supply of crescent-shaped ice. A malfunctioning ice maker can lead to inconsistent ice output or water-related issues. Replacing the assembly helps maintain proper function and prevents potential water damage. Installation requires disconnecting power and water supply for safety.
This ice maker assembly is designed to restore consistent ice production in refrigerator and freezer compartments. Operating at 115V, it includes an ice mold, control device, and a heater guard to support efficient freezing and ejection cycles. The unit receives water from the inlet valve, freezes it in the mold, and then ejects the ice cubes into the storage bin. It continues this cycle until the bin is full, ensuring a reliable supply of crescent-shaped ice. A malfunctioning ice maker can lead to inconsistent ice output or water-related issues. Replacing the assembly helps maintain proper function and prevents potential water damage. Installation requires disconnecting power and water supply for safety.
Installation Instructions
Brett from BATON ROUGE, LA
Ice maker quit making ice
You do not have to completely remove the hex head screws that hold ice maker to wall of freezer. Just loosen about halfway and disconnect power and lift old ice maker up and out.
New ice maker has the same brackets that go on the screws and you can then retighten the screws and plug in new ice maker.
I expected to hear it imm ... Read more ediately bring water in but it took about a day or so. I thought something was still wrong but I had ice after about 24 hours.
New ice maker has the same brackets that go on the screws and you can then retighten the screws and plug in new ice maker.
I expected to hear it imm ... Read more ediately bring water in but it took about a day or so. I thought something was still wrong but I had ice after about 24 hours.
Read less
This ice maker assembly automatically produces and stores ice by cycling water through freezing and release stages. Designed for reliable, consistent output, it supports everyday convenience. Replacing a malfunctioning ice maker can resolve issues such as no ice production, irregular cube size, or jamming.
This ice maker assembly automatically produces and stores ice by cycling water through freezing and release stages. Designed for reliable, consistent output, it supports everyday convenience. Replacing a malfunctioning ice maker can resolve issues such as no ice production, irregular cube size, or jamming.
The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out and into the ice bucket, ready for the ice to be used. The outside diameter of this piece is almost two inches by two inches. The reason for needing to replace your gear is if the current one is broken/missing a tooth, or if your icemaker is not dispensing ice and is noisy.
The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out and into the ice bucket, ready for the ice to be used. The outside diameter of this piece is almost two inches by two inches. The reason for needing to replace your gear is if the current one is broken/missing a tooth, or if your icemaker is not dispensing ice and is noisy.
Designed to deliver reliable, automatic ice production, this genuine OEM ice maker assembly restores full ice-making functionality within your refrigerator or freezer. It receives water from the inlet valve, freezes it in the internal mold, and efficiently releases formed ice into the storage bin for convenient use. Built as a complete unit with integrated components for a seamless fit, it provides dependable performance and easy installation. Ideal for replacing a faulty or non-producing ice maker, it helps restore consistent ice output and smooth, everyday operation.
Designed to deliver reliable, automatic ice production, this genuine OEM ice maker assembly restores full ice-making functionality within your refrigerator or freezer. It receives water from the inlet valve, freezes it in the internal mold, and efficiently releases formed ice into the storage bin for convenient use. Built as a complete unit with integrated components for a seamless fit, it provides dependable performance and easy installation. Ideal for replacing a faulty or non-producing ice maker, it helps restore consistent ice output and smooth, everyday operation.
Installation Instructions
Brenda from Sanford, FL
Did not make ice
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Then I took the new icemaker out of the box and reversed the procedure.
The icemaker is making ice now.
The icemaker is making ice now.
Introducing the ICE MAKER Assembly with 6-pin from the reputed brand Frigidaire. A genuine OEM part designed to function seamlessly with select Frigidaire, Electrolux, White Westinghouse, and Tappan models. The ICE MAKER Assembly features an ice mold and a control device and works by receiving water from the water inlet valve which it holds until it freezes. Post freezing, the ice is ejected and the maker is again refilled with water, repeating the cycle until the ice bin is filled to its capacity. Please ensure to safely store any perishable food and unplug the freezer prior to the installation of the part. It's also recommended to use work gloves during the installation for protection.
Introducing the ICE MAKER Assembly with 6-pin from the reputed brand Frigidaire. A genuine OEM part designed to function seamlessly with select Frigidaire, Electrolux, White Westinghouse, and Tappan models. The ICE MAKER Assembly features an ice mold and a control device and works by receiving water from the water inlet valve which it holds until it freezes. Post freezing, the ice is ejected and the maker is again refilled with water, repeating the cycle until the ice bin is filled to its capacity. Please ensure to safely store any perishable food and unplug the freezer prior to the installation of the part. It's also recommended to use work gloves during the installation for protection.