Exmark Lawn Mower Parts

Why Genuine OEM Matters

Shop By Appliance Type Shop By Part Type

Popular Exmark Lawn Mower Parts

Snow Blower Lock Nut – Part Number: 3296-42

Your Price

$5.95

Exmark Lawn Mower Snow Blower Lock Nut

PartSelect Number PS8953555

Manufacturer Part Number 3296-42

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

Discharge Deflector – Part Number: 138-7502

Your Price

$68.49

Exmark Lawn Mower Discharge Deflector

★★★★★

1 Review

PartSelect Number PS16665209

Manufacturer Part Number 138-7502

Leaf Blower Hex Nut – Part Number: 114-9015

Your Price

$5.95

Exmark Lawn Mower Leaf Blower Hex Nut

★★★★★

2 Reviews

PartSelect Number PS8843581

Manufacturer Part Number 114-9015

This OEM hex nut secures the blower impeller assembly to the motor drive shaft. This part is black, made out of metal, and is sold individually. Hex nut threads can become damaged, and ends can become rounded off over time. This is a symptom of fatigue and will require replacement. You will know this part is broken if the impeller is no longer able to spin with the drive shaft. There will be no airflow from the blower. Most of our customers rated this as an easy repair, all you will need is a wrench or socket and torque wrench. When installing your new hex nut on the impeller blower, ensure your torque to the manufacturer specs when securing it to the drive shaft.

Installation Instructions

Donald B Butler from BUFFALO, NY

Could see the impeller was damaged - blades missing.

Safety First
Note: Ensure the appliance is unplug prior to working on it.

1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and washer- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go. Read more...