Find your partEnter your model number or a part number and click "Search"
Here is an example model number plate:
Popular Edger Carburetors
PartSelect Number PS11824881
Manufacturer Part Number 588171156This OEM carburetor mixes the air-fuel mixture to the proper ratio for combustion in your engine. This carburetor is sold individually, is silver in color and metal in material, and is located on the intake of the engine. Issues with your carburetor will cause problems with your engine running, and could cause excessive smoke due to too much gas. This can happen due to corrosion inside the carburetor. Carburetors can be rebuilt easily, and repairing them requires an allen wrench and a screwdriver. When troubleshooting your carb, remove the air filter and pour a teaspoon of fuel into the carburetor. Pull the starter rope, and if the engine starts then quickly dies, the carburetor is likely the problem. When replacing your carburetor, also replace all gaskets when doing so, as they are a one-time use.
PartSelect Number PS10039106
Manufacturer Part Number A021000723This is an Original Manufacturer Approved Carburetor Assembly used on a variety of Gas Powered String Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\\\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. Rb-K70A
Carburetor Repair Kit
PartSelect Number PS9970355
Manufacturer Part Number 530069832
PartSelect Number PS9285097
Manufacturer Part Number 530057844
PartSelect Number PS10009861
Manufacturer Part Number 753-1225
PartSelect Number PS9194331
Manufacturer Part Number A021002310
PartSelect Number PS9970517
Manufacturer Part Number 530071634The OEM Carburetor Assembly includes the carburetor and primer bulb. This assembly is used to mix the air/fuel mixture to the proper ratio for combustion, and attaches to the intake of the engine. Installation requires a screw driver, pliers and socket set, and is rated as "Easy" by customers. If broken due to wear/fatigue/damage, the engine will run rough, be hard to start and have performance issues. If this happens, the part should be replaced. Refer to your make, model and diagrams to ensure this part is correct.