Echo Chipper Shredder Hardware

Echo Chipper Shredder Trimmer Fuel Grommet

★★★★★

★★★★★

7 Reviews

This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.

Echo Chipper Shredder Trimmer Wing Bolt

★★★★★

★★★★★

1 Review

The Wing Bolt is a gold, metal bolt, sold individually. It is rated as "Easy" to install, and requires no special tools. This part secures the air filter cover and air filter to the air cleaner case, and attaches to the air cleaner assembly. If broken due to fatigue/wear/damage, the air cleaner assembly will come loose. Refer to your make, model and diagram to ensure you're choosing the right part for your assembly.

Echo Chipper Shredder Fuel Line Clip Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of metal, and is silver in color. When this clip becomes damaged or worn, it can no longer support the fuel line, which may cause a fuel leak and/or smell. This wear will occur as part of regular use of your equipment. To complete this repair, you will need a wrench, screwdriver, and pliers. It is found in a variety of locations depending on your model; please refer to your owners manual for the exact location. Customers rated this repair as Easy.

Echo Chipper Shredder Trimmer Clip This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers. This part attaches to the fuel filter to secure the fuel line ot the fuel filter. If broken, likely due to fatigue, there may be a fuel leak. If damaged or missing, the part should be replaced. Refer to your owners manual or model number to ensure you are choosing the correct part.

Echo Chipper Shredder Trimmer Nut This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends). This nut can have various uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.

Echo Chipper Shredder Screw It is an authentic OEM sourced item that is specially produced for use with Shindaiwa and Echo handheld lawn and garden equipment. This screw is generally used to secure the housing, please make sure to check appropriate diagrams for correct location and use of this hardware. One torx screw is included per order.

Echo Chipper Shredder Screw This is a genuine OEM sourced replacement part designed for use with Echo blowers/trimmers. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To remove or install this screw you would need a screwdriver.

Echo Chipper Shredder Washer 5 This OEM metal washer is commonly used on a variety of different small engine/lawn equipment models and is sold individually. This washer is used to help evenly distribute pressure from the securing bolt or screw with the cylinder cover, to reduce any effects of vibration from the engine. If the connection between the securing fastener becomes loose, or if you are replacing the fastener itself, it is recommended that you replace this washer as well.

Echo Chipper Shredder Starter Cover Screw This Genuine OEM screw is a standard replacement part used on a variety of gas-powered trimmers and brushcutters. Constructed from durable metal and sold individually, this screw is typically used to secure the starter cover to the unit, ensuring a tight and stable fit during operation. The screw features a 4x16 thread size and requires a hex key or Allen wrench for proper tightening or removal. Replacing worn or stripped screws helps maintain the structural integrity of your equipment and ensures continued safe use.

Echo Chipper Shredder Screw 5x20-tapping This authentic manufacturer-supplied component is made for use with Echo and Shindaiwa handheld lawn and garden equipment. It is a standard hardware which may have multiple applications. Please make sure to check the owners manual and the appropriate diagrams of your model for the exact location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.