My Orders
Dishwasher Timers
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Shop By Brand
View More
Popular Dishwasher Timers
This is a timer for use in dishwashers. The timer is responsible for ensuring the various parts of the dishwasher cycle activate at the correct time. If the timer is in any way broken or faulty, it will cause your dishwasher to not start, take longer than normal or finish too early, and will need to be replaced as soon as possible. This timer features a mostly metal construction and features a wire terminal on its top side. Replacing this timer will require a few tools, like a screwdriver or socket wrench, and some disassembly of your dishwasher will be necessary. This timer is an individual OEM part, so it does not come with any accessories.
This is a timer for use in dishwashers. The timer is responsible for ensuring the various parts of the dishwasher cycle activate at the correct time. If the timer is in any way broken or faulty, it will cause your dishwasher to not start, take longer than normal or finish too early, and will need to be replaced as soon as possible. This timer features a mostly metal construction and features a wire terminal on its top side. Replacing this timer will require a few tools, like a screwdriver or socket wrench, and some disassembly of your dishwasher will be necessary. This timer is an individual OEM part, so it does not come with any accessories.
This dishwasher timer is a genuine replacement component that serves as the central control for regulating the timing and sequence of wash, rinse, and dry cycles. Designed for GE and Hotpoint dishwashers, it ensures that each phase of the cleaning process occurs in the correct order and duration. A faulty timer may result in unpredictable or incomplete cycles, leading to poor cleaning performance or a dishwasher that fails to finish its program. This part replaces older models such as WD21X10474 and is engineered for precise compatibility and reliable operation. Installation typically involves accessing the control panel, disconnecting the old timer, and securing the new unit using existing wiring and mounting points. Model verification is recommended prior to replacement.
This dishwasher timer is a genuine replacement component that serves as the central control for regulating the timing and sequence of wash, rinse, and dry cycles. Designed for GE and Hotpoint dishwashers, it ensures that each phase of the cleaning process occurs in the correct order and duration. A faulty timer may result in unpredictable or incomplete cycles, leading to poor cleaning performance or a dishwasher that fails to finish its program. This part replaces older models such as WD21X10474 and is engineered for precise compatibility and reliable operation. Installation typically involves accessing the control panel, disconnecting the old timer, and securing the new unit using existing wiring and mounting points. Model verification is recommended prior to replacement.
The timer manages the various dishwasher functions such as filling, washing, draining and drying.
The timer manages the various dishwasher functions such as filling, washing, draining and drying.
Timer Control
Timer Control
Installation Instructions
Jay from North Liberty, IA
Water would not drain.
The washer ran through a full cycle, but the water didn't drain out. I pulled out the drain vent and checked for foreign objects. Also checked at the drain hose/disposal joint and there was no blockage. After removing the bottom panels I noticed the solenoid was shot. Cylinder was burnt up and stuck solid in the up position. I went online
... Read more
and found that a main cause of this can be from the timer causing the solenoid to over exert and burn out. I decided if I was going to order parts and dig into a repair I should replace both. For the timer it is just a matter of unscrewing the inner door panel and unplugging the old timer. Then inserting new one. Couple of things I ran into were the door is no longer heavy enough to stay down so I grabbed a waffle iron as a weight to hold it down. Also will need to unscrew the set screw on the Door lock latch's bottom side. Pay close attention to how it was together helps. For the solenoid I removed the main screws holding the unit in place as well as the c-clip holding the plastic arm. Undo the spring and plug and the whole unit comes out. Reverse these steps with the new solenoid to install.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
The purpose of a dishwasher timer is to control the unit's cycles by regulating the length of time that power is directed to each component.
The purpose of a dishwasher timer is to control the unit's cycles by regulating the length of time that power is directed to each component.
