Dirt Devil Parts

Dirt Devil Style 10 Belt These are genuine manufacturer sourced replacement belts used on upright vacuums. It helps to drive the brushroll assembly. These belts are made out of rubber. Includes two (2) belts per order. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • First remove nozzle guard • Slide belt off motor shaft • Lift and remove brushroll • Dispose of old belt • Place belt on motor shaft, then slip brushroll through belt • With belt in place, pull and slide brushroll into nozzle • Reattach nozzle guard

Dirt Devil Style 5 Belt This is a genuine manufacturer sourced replacement tyle 5 drive belt used on Dirt Devil and Royal upright vacuums. It is used to drive the brush roll assembly. This belt is made out of rubber material and it is sold individually. Over time belts will wear out and stretch requiring replacement. It is recommended to replace these belts every 6 months to ensure optimum performance. Replacing a belt of an upright vacuum is a simple and quick task that should only require a screwdriver. • Ensure the vacuum is unplugged • First remove the bottom plate • Slide the belt off the motor shaft • Lift and remove the brush roll • Remove the old belt • Place the new belt on the motor shaft • Slide the brush roll through the belt • With belt in place, pull and slide brush roll into nozzle • Secure the bottom plate • Reattach nozzle guard

Dirt Devil Dwt Filter Assembly It is a high quality OEM sourced replacement filter assembly that is specially designed for use with Dirt Devil and Royal carpet cleaners. This is the dirty water filter for the recovery tank. One foam filter in a plastic frame is included per order.

Dirt Devil Belt Pack Genuine Dirt Devil Style 4/5 Belt fits all Featherlite Uprights that use paper bags, all Swivel Glide Uprights that use paper bags, and all Dirt Devil Vision Uprights. Replace your belts every 3 to 6 months.

Dirt Devil F-2 / Universal Filter Assembl This universal filter assembly is a genuine Dirt Devil part, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use on vacuums. This pleated paper filter will help to remove dust and other particles from the air. Keep in mind, this universal filter is sold individually. No tools needed to replace this part, simply take out the old filter and replace it with a new one.

Dirt Devil Belt Genuine OEM replacement part, this part is sold individually. The purpose of this belt is to rotate the brush roll assembly on the vacuums shown below. It is situated and installed in different places depending on the vacuum you have. These belts do have a tendency to wear out. It is advised to order an extra one to keep on hand for future use.

Dirt Devil Belt Lifter This belt lifter is an OEM part direct from the original manufacturer for use with Dirt Devil and Royal hand vacuums. This belt lifter is used to adjust the belt on the brush roll and motor shaft. This part is made of black plastic and is sold as an individual replacement part.

Dirt Devil Style 20 Belt This is a genuine OEM sourced replacement part that is intended to be used with upright vacuums from Dirt Devil and Hoover. The belt attaches to the motor pulley and the brush roll in the vacuum's base. This item is used to allow the motor to rotate the brush roll. This belt is sold as an individual replacement part.

Dirt Devil Hepa Filter Assembly This is a Genuine OEM Sourced replacement part designed for use with Upright Vacuums. This Filter helps to keep the air clean. This part is made out of Plastic and Paper and it is Sold Individually. No tools are required to replace this Filter. You can simply remove the old filter from the vacuum cleaner and replace it with the new one. Designed according to strict HEPA standards, the media in this filter trap particles 75 times smaller than a human hair, including 99.97% of dust mite debris, animal dander, molds and pollen down to 0.3 microns.

Dirt Devil Wheel Retainer Cap This is a high-quality component which is made for Dirt Devil and Royal vacuums. It is supplied from the original equipment manufacturer. The cap is utilized to secure the wheel on the axle. If the cap is damaged or missing, this part will provide an identical replacement. Make sure to check the diagrams for your specific model for the correct installation of the new component. This high-quality wheel retainer cap is made of durable material and is sold as an individual item. Replacing it is a simple task that should only require pliers.