DeWALT Screwdriver Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular DeWALT Screwdriver Parts
Your Price
$6.40
In Stock
DeWALT Screwdriver Cord Protector
PartSelect Number PS17061542
Manufacturer Part Number N918736
This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Your Price
$7.33
In Stock
DeWALT Screwdriver Carbon Brush
PartSelect Number PS10167153
Manufacturer Part Number 176846-04
This carbon brush is an authentic DeWalt replacement part. It is sold individually, 2 are needed to make a set • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.
Your Price
$60.86
In Stock
DeWALT Screwdriver Clutch Assembly
PartSelect Number PS10172536
Manufacturer Part Number 429634-00
This is an authentic manufacturer approved replacement part designed for use with drills/screwdrivers. This clutch assembly is connected to the transmission and the shaft. Keeping an eye on equipment performance will determine when the clutch requires replacement. Includes part numbers 176842-00, 89210-00
Your Price
$23.14
In Stock
DeWALT Screwdriver Ball Bearing
PartSelect Number PS16680871
Manufacturer Part Number 605040-20
This Ball Bearing has metal shielding on both sides. This is a genuine Dewalt replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Your Price
$6.40
In Stock
DeWALT Screwdriver Ball
PartSelect Number PS10184189
Manufacturer Part Number 696631-00
Genuine Dewalt replacement part, this item is sold individually. The 696631-00 Steel Ball is part of the chuck assembly of the Impact Drivers shown below. When you pull back the sleeve of the chuck assembly and insert your bit, the Steel Ball is the part that locks the bit in the chuck assembly. In the Screw Drivers listed below this is the part that secures the Bit Holder in the spindle.
Your Price
$30.17
In Stock
DeWALT Screwdriver Clutch (sold Individually)
PartSelect Number PS10186215
Manufacturer Part Number 96558-00
This is the clutch • for various models of screw guns and drywall screwdrivers. Screw guns, not to be confused with power drills, feature a nose instead of a chuck and the clutch within is responsible for engaging or disengaging the motor of the screw gun to stop it from overdriving the screw. This OEM clutch is made of durable metal, has a 1-inch diameter and includes only a single retaining ring. The clutch within a screw gun can be damaged by simple fall damage, overdriving screws, or using the screw gun to drive nails or bolts, all of which will require replacing the clutch. Depending on your model, there may be multiple clutches within the tool assembly, so make sure to check any applicable diagrams before ordering. • Replacing the clutch only requires a pick, screwdriver, and wrench, but first requires you to disconnect your screw gun from power or disconnect its battery.
Your Price
$6.40
In Stock
DeWALT Screwdriver Clutch
PartSelect Number PS10186217
Manufacturer Part Number 96558-04
It is a genuine item that is supplied by the original manufacturer for use with DeWALT and Black and Decker power tools. This clutch is a special component that helps to engage the drive shaft. It provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams for your model for the exact location and the correct installation of this part. One durable metal clutch is included. You may need a screwdriver and a wrench set to perform this repair.
Your Price
$6.71
In Stock
DeWALT Screwdriver Retainer
PartSelect Number PS10165290
Manufacturer Part Number 094518-00
This retainer, also known as a retaining ring or split ring, is a genuine OEM replacement part used in cordless drills. It is responsible for securing the spindle within the clutch housing so that it remains stable during use and ensuring the components such as gears and bearings do not slide off the spindle. Over time the retainer may crack, corrode, or fall off, leading to wobbly parts and excessive vibration. Ensure the drill is off before beginning the replacement. Remove the chuck, and clutch housing. Use a set of pliers to remove the retainer from its groove. Clean the mounting surface and place the new ring in the groove on the spindle. Reassemble the drill components in reverse order.
Your Price
$6.40
In Stock
DeWALT Screwdriver Compression Spring
PartSelect Number PS10187186
Manufacturer Part Number N020157
This compression spring is sourced directly from the original equipment manufacturer for use with DeWALT screwdrivers. It is an important component of the chuck that secures bits. Over time it may wear out and lose tension eventually requiring a replacement. To ensure the correct installation of this hardware, check the diagrams of your specific model. Keep in mind this high-quality compression spring is made of durable metal and is sold individually. Remove the chuck cover to replace this compression spring. Note, the <a href="https://www.ereplacementparts.com/ball25mm-p-679316.html" target=blank><u>#N022764 Ball-2. 5mm</u></a> that is part of the mechanism is sold separately.
Your Price
$6.40
In Stock
DeWALT Screwdriver Steel Ball
PartSelect Number PS10187247
Manufacturer Part Number N022764
This 2.5mm ball is an authentic OEM component which is specially designed for use with DeWALT impact screwdrivers. The ball is fitted within the tool holding fixture, providing the ability to secure a drill bit. It is an identical replacement for a faulty or a missing hardware that was installed on a new unit. Note, this high-quality ball is made of durable metal and is sold individually. Keep in mind you will need a screwdriver to remove the old part and secure the new one. Refer to the owners manual and the diagrams of your model for the exact location and the correct application.
DeWALT Screwdriver Appliance Types
Popular DeWALT Screwdriver Models
Below are the most popular DeWALT Screwdriver models we have. Enter your model number in the search box to find your model.
- DW284 (Type 4) Power Unit
- DCF630B (Type 1) Cordless Screwdriver
- DCF610S2 (Type 2) Screwdriver
- DCF610S2 (Type 3) Screwdriver
- DW255 (Type 6) High Spd Drywall Screwdri
- DW257 (Type 5) Screwdriver
- DW257 (Type 6) Screwdriver
- DCF620B (Type 1) 20v Scrugun
- DWHT66719 (Type 1) Cordless Screwdriver
- DW267 (Type 4) Versa-Clutch Scrdvr
- DW272W (Type 5) Screwdriver
- DCF624B (Type 1) 20v Mx Screwgun Thr Nscn
- DW276 (Type 5) Framing Drywl Scrdvr
- DW252 (Type 5) Drywall Screwgun
- DW252 (Type 6) Drywall Screwgun
- DW272 (Type 6) Drywall Screwdriver
- DW272 (Type 5) Drywall Screwdriver
- DCF624P2 (Type 1) 20v Mx Screwgun Thr Nscn
- DCF6202 (Type 1) Collat Mag Att
- DW269 (Type 4) Versa Clutch Screwdriver