DWHT66719 (Type 1) DeWALT Screwdriver - Overview

This ring is an OEM part supplied from DeWALT for use in impact screwdrivers. The retaining ring attaches to the shaft on the end of the screwdriver to secure the sleeve, the spring, and other components. If the ring becomes damaged or is lost it will need to be replaced. Once the ring is removed everything will slide off, so make sure to...Read more keep track of the order and orientation of all parts. Replacing this part will require a screwdriver and pliers. To ensure proper installation please refer to the specific diagram for your model. This is an individually sold part made of durable metal.

This sleeve is an OEM direct from DeWALT. Constructed of durable metal, the sleeve is compatible with several screwdriver devices. This part is fitted between the washer and spring in the nose cone, securing the anvil assembly. The sleeve is sold individually. A hex key may be necessary in the removal and replacement.

This high-quality spring is designed for use with DeWALT impact screwdrivers. It is supplied by the original equipment manufacturer. The spring applies tension on the sleeve. Over time it may wear out and lose tension eventually requiring a replacement. It is made of high-quality metal and is sold as an individual component. Make sure to ...Read morecheck the diagrams of your model for the exact location and the correct installation of this spring. Replacing it is a simple task that may only require pliers to remove and reattach the retaining ring that secures the sleeve.

This compression spring is sourced directly from the original equipment manufacturer for use with DeWALT screwdrivers. It is an important component of the chuck that secures bits. Over time it may wear out and lose tension eventually requiring a replacement. To ensure the correct installation of this hardware, check the diagrams of your s...Read morepecific model. Keep in mind this high-quality compression spring is made of durable metal and is sold individually. Remove the chuck cover to replace this compression spring. Note, the #N022764 Ball-2. 5mm that is part of the mechanism is sold separately.

This 2.5mm ball is an authentic OEM component which is specially designed for use with DeWALT impact screwdrivers. The ball is fitted within the tool holding fixture, providing the ability to secure a drill bit. It is an identical replacement for a faulty or a missing hardware that was installed on a new unit. Note, this high-quality ball...Read more is made of durable metal and is sold individually. Keep in mind you will need a screwdriver to remove the old part and secure the new one. Refer to the owners manual and the diagrams of your model for the exact location and the correct application.

This is an authentic manufacturer sourced part, it is not an aftermarket equivalent. It is sourced from original equipment manufacturer for use with Dewalt screwdrivers. It helps to distribute the pressure evenly between two connected parts. Make sure to check appropriate diagrams for correct use and location of this hardware. Please note, this metal washer is sold individually.