DeWALT Boring Machine Parts

This carbon brush is an authentic DeWalt replacement part. It is sold individually, 2 are needed to make a set • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Genuine DeWalt replacement part rnIncludes 1 Carbon Brush with wire lead in rubber sheath attached.rn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine OEM part sourced from the manufacturer. Sold individually. Washer provides a bearing surface for fastener load distribution or acts as a spacer. Is used in a number of impact drivers, listed below.

This is a genuine Dewalt replacement part, it is sold in a set of two. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This replacement chuck key is a genuine Dewalt item, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with drills. This chuck key allows user tighten and loosen the jaws of the chuck. This item is made from strong metal and it is sold individually.

This is an original replacement part manufactured for use with drills. This hardened plastic spade handle is secured at the back of the drill using a knob, which is available separately. The spade handle provides an additional grip option for heavy duty drills, please note the spade handle is sold individually.

This is an authentic manufacturer approved replacement switch used on DeWALT drills. It is the part of the tool handling on/off and variable speed functions. Since switches have moving mechanical parts, they will eventually wear out and will require a replacement. Switch has a plastic body and it is sold individually. To replace this switch you would need a screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

This is an OEM sourced replacement part which is specially designed for use with DeWALT and Black and Decker drills. It allows user to secure drill bits. The ratcheting action clicks the jaws tightly into place for reduced bit slippage. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. NOTE: This 3/8" capacity chuck mounts to the drill using a 1/2"-20 threaded spindle. The light-weight plastic design provides comfort while the keyless two-sleeve construction adds the efficiency and ease-of-use of keyless bit-swapping. See our post on Removing a Cordless Drill Chuck if you need help replacing your old chuck.

This genuine replacement keyless drill chuck is designed for quick, tool-free bit changes and reliable performance during demanding drilling and driving tasks. Built with a durable metal construction and an automatic locking mechanism, it provides a strong grip to help minimize bit slippage, even in high-torque applications. The chuck supports a wide range of bit sizes and installs directly onto the drill spindle, making it an effective solution for restoring accuracy, stability, and ease of use when an existing chuck is worn or damaged.