Official Craftsman Generator Parts

GROMMET, DRAIN COCK – Part Number: N103455

Your Price

$22.50

PartSelect Number PS18993263

Manufacturer Part Number N103455

This is an OEM part sourced directly from the manufacturer, sold individually. The grommet is inserted into the fuel tank of the generator to hold the fuel drain cock, which can be shut off to stop the flow of fuel, or opened to allow the fuel to flow to run the generator. No tools are required for installation. Part is compatible with the models listed below.

Fuel Shut-Off Valve – Part Number: G080270

Your Price

$33.25

Craftsman Generator Fuel Shut-off Valve

PartSelect Number PS11923823

Manufacturer Part Number G080270

Your Price

$58.31

Craftsman Generator Fuel Gauge Cap

★★★★★

2 Reviews

PartSelect Number PS9314364

Manufacturer Part Number B4363GS

This OEM replacement fuel gauge cap is designed for use in generators. It comes in a cylindrical shape and has a built-in window to easily view the fuel levels without pulling out the entire cap. It is approximately 5.25 inches in length, while the head has a diameter of 3 inches. The purpose of the cap is to cover and protect the fuel gauge, which indicates the levels of gas available in the tank. It prevents dirt and debris from entering the gauge area and prevents fuel from leaking out. A faulty cap will allow contaminants to enter the gauge, and cause fuel to leak, leading to inaccurate fuel readings and safety risks. Twist the cap to remove it and clean the surrounding area thoroughly. Place the new gauge cap in position and ensure that it is locked in place.

Fuel Valve With Bushing – Part Number: 192980GS

Your Price

$27.33

Craftsman Generator Fuel Valve With Bushing

★★★★★

6 Reviews

PartSelect Number PS8911051

Manufacturer Part Number 192980GS

Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor. This part is found on the underside of the fuel tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair. Customers rate this repair as Easy.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

James from PICAYUNE, MS

Dry rotted rubber

Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes. Read more...

Your Price

$35.85

Craftsman Generator Solenoid

★★★★★

3 Reviews

PartSelect Number PS9064363

Manufacturer Part Number 691656

A starter solenoid, also known as a starter relay, is an electrical component that is used within small engine systems to control the starter motor by engaging it when an ignition key is turned - acting as a bridge between the battery and starter motor. This starter solenoid is designed for use with various models of lawn mower and other small engine equipment and is sold as an individual part with no securing hardware. Depending on your model and type of equipment, the location of the starter solenoid may be different, but it is typically located on or around the engine block, and close to the battery. If you notice issues with starting your equipment such as clicking sounds, intermittent starting or simply not starting at all, the solenoid may be burnt or damaged and need replacement immediately. You can test the solenoid for continuity on its terminals with a multimeter, but make sure to take safety precautions. To replace a starter solenoid, you need only disconnect the equipment from power, locate the solenoid, disconnect and remove any connections and securing bolts before you can replace it and test for full functionality.

Installation Instructions

Bruce from CARNATION, WA

Wouldn’t start.

I installed a new solenoid starter. Took me a total of 20 minutes. Started right up. Read more...

Your Price

$130.64

Craftsman Generator Carburetor

PartSelect Number PS9983854

Manufacturer Part Number 592929

This carburetor is a critical engine component designed to mix air and fuel in the proper ratio for efficient combustion. Built for Briggs & Stratton engines commonly found in lawn and garden equipment, it also serves as a compatible replacement for select Troy-Bilt generators. Installing a new carburetor can restore smooth engine operation, improve throttle response, and enhance fuel efficiency, helping extend the life of your equipment. For best results, confirm compatibility with your specific model before installation.

Element Air Filter – Part Number: G078601

Your Price

$32.76

Craftsman Generator Element Air Filter

PartSelect Number PS11923808

Manufacturer Part Number G078601

The air cleaner element goes between the air cleaner cover and the canal cover. It is priced as an individual replacement part and helps to filter the air moving through the device. Filters will become dirty over time and will need to be replaced. This air cleaner is an OEM from Generac for use in generators and may require a screwdriver and a socket set in order to do the replacement.

NUT .375-16 HEX WHIZ – Part Number: SSF-8111-ZN

Your Price

$6.40

Craftsman Generator Nut .375-16 Hex Whiz

PartSelect Number PS18997472

Manufacturer Part Number SSF-8111-ZN

Your Price

$133.31

Craftsman Generator Carb 410hs

PartSelect Number PS9873484

Manufacturer Part Number 0A4600

Enhance the efficiency and performance of your Generac equipment with this high-quality Carburetor. Expertly designed by Generac, this part ensures smooth and stable fuel supply to your machine's engine, improving its overall operation and longevity. The durable construction ensures it stands up to rigorous and prolonged usage, while maintaining its functionality. It's easy to install, so you can get your equipment up and running swiftly. Depend on this Generac Carburetor for optimal operational efficiency. The investment in this part will aid you in maintaining the reliability of your Generac machinery.

Installation Instructions

Robert from BATON ROUGE, LA

Carberator gummed up from sitting in storage. Fuel gone bad in the tank

With a 12-in-one nut screwdriver I removed the two bolts holding the breather cover and air filter. Then I used about a 9/16 deep socket ratchet to remove the nuts holding the breather housing to the carburetor assembly studs. A pair of needle nose pliers was used to disconnect the throttle then I wriggled the breather cover away from the carburetor so I could get to the fuel line. I managed to pull the fuel line off the carburetor and from the shut-off valve at the tank. The carburetor slid freely and easily off the carburetor studs and I was careful not to damage the carburetor gasket since none came with the new carburetor. I used a single edge razor blade to free the gasket from the old carburetor. A very small amount of silicone lube was used on the gasket and then I sandwiched the old gasket between the carburetor intake and the new carburetor and attached the throttle connection. Before beginning the reassembly I unscrewed the shut-off valve from the tank and used a funnel to drain the very old fuel into a 5-gallon bucket. I made sure the valve was clean by spraying carburetor cleaner through it and did the same with the old fuel line, making sure everything was clear of any obstruction. Then replace the breather assembly back over the carburetor studs, snugged the nuts back on and then replaced the air filter and cover. I re-attached the fuel line to the fuel valve and the carburetor, added a half gallon of clean fresh fuel and was ready for a smoke check. Pulled the starter rope three times with the choke full on, then turned to half-choke and the puppy started right off. I then turned the choke completely off and the engined purred along. I then exercised the generator by plugging in and running a number of power tools for about 15 minutes. Followed standard shut off procedures and the generator is ready for use. Saving the old carburetor to be cleaned and held on reserve for the future. Might want to have another gasket handy or some gasket material should it have to be replaced in the future. Read more...

Your Price

$40.83

Craftsman Generator Support-leg

PartSelect Number PS9940365

Manufacturer Part Number 312510GS

Upgrade your appliance with this Briggs and Stratton Support Leg. This incredibly durable and well-designed part is designed specifically for Briggs and Stratton appliances, ensuring a seamless fit and superior performance. As a product of a brand known for quality and reliability, this Support Leg offers exceptional stability and support. Perfect for those who appreciate high-quality appliance parts and straightforward improvements, this product is a reliable and smart choice for any Briggs and Stratton appliance owner. Enhance the longevity and functionality of your appliance with this essential component from a brand esteemed by professionals and homeowners alike.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Craftsman Generator Parts

Popular Craftsman Generator Parts

Craftsman Generator Appliance Types

Related Craftsman Generator Parts

Popular Craftsman Generator Models

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Craftsman Generator Parts

Find Your Part

Popular Craftsman Generator Parts

Craftsman Generator Appliance Types

Related Craftsman Generator Parts

Popular Craftsman Generator Models