Coffee Maker Sensors

Coffee Maker Flowmeter DeLonghi has made these part to be used with many different models of espresso makers. The Flowmeter is used to detect and measure the flow of water for brewing coffee or frothing milk. This part is normally replaced if it no longer reads the flow correctly, a read error has occurred, or if it has become physically damaged and leaks. Tools Used: • Philips Head Screwdriver • Flat Head Screwdriver • Needle Nose Pliers

Coffee Maker Sensor This authentic item is supplied directly from the original equipment manufacturer for use with DeLonghi coffee makers. It is a special component which helps to detect whether the water tank is full or empty. Over time it may wear out or get damaged eventually requiring a replacement to ensure your unit functions properly. One high-quality sensor is included. Make sure to refer to the owner's manual and the appropriate diagram for the correct repair procedure. A screwdriver will be needed to take apart and reassemble the housing when replacing this sensor.

Coffee Maker Hall Sensor This is an authentic replacement part sourced directly from the manufacturer. The hall sensor is commonly found in DeLonghi coffeemakers. This part is used to send electrical signals from the flowmeter to allow the machine to monitor the water usage. This item is available as an individual replacement part.

Coffee Maker Nt Sensor

Coffee Maker Sensor Ntc

Coffee Maker Sensor Ntc Shibaura Ptm53c-d8

Coffee Maker Sensor-tank

Coffee Maker Sensor

Coffee Maker Sensor

Coffee Maker Hall Sensor