Chop Saw Filters

The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to clean the fuel of debris. It should be changed regularly. Check your owners manual for the recommended replacement schedule for your engine. If the fuel is leaking or their is a blockage, you will know the part is broken and will likely need to be replaced. To check for small leaks, feel around for dampness and the smell of fuel.

This is an authentic manufacturer approved replacement part used on Makita cut-off saws. Its purpose is to filter out dust and debris from contaminating the carburetor. This filter is made out of paper and plastic. It is sold individually. To replace this you would need a screwdriver. • Remove screws securing the cover • Remove cover and replace air filter • Secure the cover back

This pre filter set is a an authentic OEM item designed for Makita 4-stroke handheld cut-off saws. These high quality pre filters help ensuring the air that goes into the engine is free of dust and other contaminants. If the air filter becomes clogged, it may cause poor engine performance. This set includes (1) foam pre filter and (1) bag of a special oil to soak the filter in. The oil will help to trap fine dust and particles. Please note, the main pleated paper filter is sold separately. No tools needed to replace this filter, simply take out the old pre filter and replace it with a new one.

This is an authentic OEM part. The Makita inner filter is made for use with several 4-Stroke Handheld Cut-off Saws. The plastic and mesh inner filter is designed to help secure the air filter, allowing it to capture dust and debris. A screwdriver is required for making the proper replacement. The inner filter is sold individually.