Official Caloric Microwave Parts | Order Today, Ships Today | PartSelect

Popular Caloric Microwave Parts

Your Price
$6.12
Light Bulb - 40W
(36)
PartSelect Number PS884734
Manufacturer Part Number 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
judie from mays landing, NJ says,

interior drawers were off their rollers
pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and ha...read more

Your Price
$5.05
Light Bulb - 40W
(88)
PartSelect Number PS2376034
Manufacturer Part Number 8206232A
This exterior light bulb for your microwave is 40W and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Deborah from Millersville, MD says,

light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old...read more

Your Price
$7.31
Light Bulb - 40W (sold individually)
(13)
PartSelect Number PS1156014
Manufacturer Part Number 8206443
The 40W light bulb is found in the interior of your microwave, which will need to be replaced if you have noticed the light is no longer coming on after opening the door. The light bulb is clear in color and made of glass. For this installation, you will need a Phillips screw driver and utility knife. Before beginning, make sure to disconnect the power and wait a few minutes. Remove the two screws in the groove vent, set aside, and then lift the grill vent forward and pull up to remove. The light bulb should be underneath a panel and may require the use of your utility knife to remove the silicone holding it in place. Line the new bulb up with the socket and screw it into place until it is snug.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Chris from Cedar Hill, TX says,

Burned out light under microwave and Filters needed changing
I just removed the multiple screws which held the hood cover on. I then attempted to remove the light bulbs from the socket. This proved impossible because the bulbs were so fragile from the heat an...read more

Your Price
$11.92
Surface Burner Plug-In Block Kit
(13)
PartSelect Number PS340571
Manufacturer Part Number 330031
The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.
Fixes these symptoms
Element will not heat


Installation Instructions
Jon from Oakley, CA says,

Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dry...read more

Your Price
$21.22
Rectifier
PartSelect Number PS11738693
Manufacturer Part Number WP13091701
The rectifier (also known as a diode) provides the microwave with energy to cook food. If your appliance is not producing heat or not turning on it could be due to the breakdown of the rectifier. This part works with microwaves, microwave oven combos, and wall ovens. This is one of the most common parts to fail over time in a microwave. This part is just under 3-1/2 inches in length. It is a genuine OEM part that is shipped right from the manufacturer. Make sure to use the proper precautions before attempting this repair. Ensure the appliance is unplugged.
Fixes these symptoms
No heat


Your Price
$4.73
Hex Nut
(2)
PartSelect Number PS11742711
Manufacturer Part Number WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
Fixes these symptoms
No Symptoms for this part
Your Price
$33.09
2 Piece Broiler Pan
(2)
PartSelect Number PS971245
Manufacturer Part Number 4396923
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set includes both the pan and the grid. The grid is the top part. The slotted design allows grease to easily drip into to the pan below. Not only does it catch all of the drippings, it also prevents splatter and smoke while cooking. The pan can also be used separately for baking and roasting. This cookware features a durable porcelain finish, which means it is incredibly easy to clean, and is dishwasher safe. It is roughly 1.5 inches deep, and measures approximately 16.5 inches by 12.5 inches. If your two-piece broil plan is lost, rusted, or damaged this is the replacement you need.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Lois from Elmer, NJ says,

Bought house & stove was missing rack & broiler
slid in groove

shipment & arrival of new parts unbelievably fast....thanks...read more

Your Price
$8.38
Micro Monitor Switch
PartSelect Number PS2052570
Manufacturer Part Number 56001100
A micro switch, also known as a miniature snap action switch, is used in ovens and microwaves. This is used to change the direction of power, from on to off. The switch uses a spring to open and close the connections inside of it. This part should quickly switch power direction, but if your switch is defective, damaged, or broken, it will not work properly. In this case, it is best to replace the switch. Make sure to unplug your appliance from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions and guidance.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
William from SAN JOSE, CA says,

Faulty Microwave door switch.
What is an able to do with the repair because you sent me the wrong part. I specifically specified to the person I ordered the part from that it was the microswitch that was to being normally open. He...read more

Your Price
$52.30
Broil Element
(1)
PartSelect Number PS11757430
Manufacturer Part Number WPY0063532
This broil element is found on the roof of the oven and allows for an even heat when cooking food. The element may have shorted out and not be heating the oven, which might indicate it will need to be replaced. Before beginning the repair make sure your oven has been unplugged. Open the oven door and pull the old racks out. You will need to remove the screws holding the old broiler in place at the top of the stove. This is an OEM part that comes right from the manufacturer.
Fixes these symptoms
Element will not heat
Little to no heat when baking
Little to no heat when broiling

See more...
Installation Instructions
Richard from Bealeton, VA says,

Broiler stopped workin in summer. Oven had no heat for wife to make Christmas cookies.
First thing I tripped the range breaker. Pulled the range out from the wall and unpluged main plug. I then removed the 12 sheet metal screws from the back lower cover.
I then unpluged the wires f...read more

Your Price
$23.72
Light Bulb - 120v 25w
(2)
PartSelect Number PS11747808
Manufacturer Part Number WPA3167501
This is a 120 volt, 25-watt light bulb that fits a variety of medium to large kitchen appliances. It functions by illuminating when the appliance door is open. It has a small base with a twist lock. This part is sold individually. This is a common wear part, so it is recommended order a spare and to check other appliance light bulbs in your home. This is an authentic OEM part that is sourced directly from the genuine manufacturer. Be careful when handling the light bulb; use a pair of needle nose pliers to remove the base if the glass bulb is broken.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Thomas from Oneonta, NY says,

Dryer made a loud noise and vibrated badly
First I made sure the unit was unplugged. I popped the top of the unit with a slotted screw driver, lifted the top up and rested it against the wall behind the dryer. I removed the two screws - one o...read more