Bosch Microwave Panels
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Bosch Microwave Panels
Bosch Microwave Panel-facia
PartSelect Number PS11705201
Manufacturer Part Number 00772645
Installation Instructions
Ed from FREDERICKSBRG, TX
Temperature settings stenciled on the Facia were damaged.
Replace facia panel. Turn off power to the oven. Remove oven control knobs by inserting finger tips under each side of the knob and pulling. Open oven, remove mounting screws. slide the oven out a few inches to allow clearance for the removal of the facia panel. Remove 3 torx screws under the bottom of the facia panel. The wiring harnesses for the LED temperature display and touchscreen are very short and must be disconnected in order to remove the facia. Slowly pull out the bottom of the facia panel taking care not to damage the wiring harnesses. Locate the wiring harness connections and disconnect. Lift the facia panel up and away from the oven. Carefully remove the LED temperature display from the back of the facia panel touch screen. Installing the new facia panel: The LED temp display wiring harness is very short and difficult to connect with the LED display installed on the new facia touchscreen panel. For this reason connect the wiring harness to the LED temp display before installing it in the new facia. Once the wiring harness is connected to the LED display, place the facia panel in position and reach under, align the LED display with the touch screen panel mounts and snap into place. Connect the touchscreen harness, position the facia panel and replace the three screws. Secure the oven in place, replace the knobs, and turn on the power.
Read more...
Bosch Microwave Panel-facia
PartSelect Number PS8770648
Manufacturer Part Number 00795919
This stainless steel fascia control panel serves as the front housing for select wall ovens and speed ovens, providing both protection and a clean, finished appearance. Designed to mount on the exterior of the appliance, it helps shield internal wiring and components while supporting the placement and use of the oven’s control buttons. The durable stainless steel construction resists wear from regular use and heat exposure, maintaining the appliance’s original look over time. Replacing a damaged or worn fascia panel restores the oven’s visual appeal, protects internal components, and ensures the control interface remains properly supported and aligned.
Related Bosch Microwave Parts
- All Bosch Microwave parts
- Bosch Microwave Brackets and Flanges
- Bosch Microwave Caps and Lids
- Bosch Microwave Circuit Boards and Touch Pads
- Bosch Microwave Doors
- Bosch Microwave Ducts and Vents
- Bosch Microwave Electronics
- Bosch Microwave Fans and Blowers
- Bosch Microwave Filters
- Bosch Microwave Fuses
- Bosch Microwave Glass Tray and Supports
- Bosch Microwave Hardware
- Bosch Microwave Latches
- Bosch Microwave Lights and Bulbs
- Bosch Microwave Motors
- Bosch Microwave Seals and Gaskets
- Bosch Microwave Sensors
- Bosch Microwave Switches
- Bosch Microwave Thermostats
- Bosch Microwave Trims