Bluebird Dethatcher Hardware
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Bluebird Dethatcher Hardware
Your Price
$6.40
In Stock
Bluebird Dethatcher Washer 5/16 Std Flt
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS16381824
Manufacturer Part Number 596134901
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$6.40
In Stock
Bluebird Dethatcher Lock Nut
PartSelect Number PS16381786
Manufacturer Part Number 596039201
This is a genuine OEM sourced replacement part commonly used on lawn and garden equipment. This specially designed lock nut resists loosening when it is properly threaded onto a bolt. It is has multiple applications depending on the model of your equipment. Always make sure to check appropriate diagrams for correct use and location of this nut. Includes one item per order. You will need a wrench to tighten or loosen this hex nut.
Your Price
$6.40
In Stock
Bluebird Dethatcher Hex Nut
PartSelect Number PS16382139
Manufacturer Part Number 596583702
This genuine manufacturer sourced replacement part designed for use with lawn mowers. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper use. This lock nut is made out of metal and it is sold individually. Would require a wrench to remove or install this hex nut.
Your Price
$6.40
In Stock
Bluebird Dethatcher Washer 3/8 Flat
PartSelect Number PS16382049
Manufacturer Part Number 596433701
This is an authentic replacement part that has been sourced from the original manufacturer to be used with lawnmowers, stump grinders, dethatchers, aerators, and power rakes from Husqvarna, Bluebird, Poulan, and Jonsered. The washer is used with different types of equipment and the application of the washer can vary based on the model of the machine. This washer is priced as a single item.
Your Price
$6.40
In Stock
Bluebird Dethatcher Washer 1/2 Flat
PartSelect Number PS16381616
Manufacturer Part Number 595316401
This is an authentic replacement part manufactured for use with outdoor power equipment. The washer is used with different models of equipment and can have multiple applications. This washer is sold as an individual replacement part, please see model diagram for associative parts.
Your Price
$6.40
In Stock
Bluebird Dethatcher Hex Cap Screw 5/16-18 X 1
PartSelect Number PS16575424
Manufacturer Part Number 596580801
This is an authentic OEM component from Husqvarna. The hex cap screw 5/16-18 X 1 is constructed of heavy-duty metal, and is sold individually. This item often helps to secure various components in lawn tractors. You will need a wrench for the repair.
Your Price
$6.40
On Order
Bluebird Dethatcher Washer Lock Hvy Hlcl Spr 5/16
PartSelect Number PS16381890
Manufacturer Part Number 596238801
This is an original replacement part manufactured or lawn and garden equipment. The helical lock washer is used with various types of equipment to secure part assemblies and to prevent an associated bolt from unthreading. This lock washer is sold individually, please see model diagram for part location and usage.
Your Price
$6.40
In Stock
Bluebird Dethatcher Washer, Shim 1/4 X 5/8 .062
PartSelect Number PS16575431
Manufacturer Part Number 596582301
Your Price
$6.40
In Stock
Bluebird Dethatcher Nut Jam Hex 1/2-13 Unc
PartSelect Number PS17016732
Manufacturer Part Number 596433401
This genuine OEM hex nut is a high-quality replacement part designed for use with riding lawn mowers and garden tractors. Unlike aftermarket alternatives, this part is sourced directly from the original equipment manufacturer to ensure a precise fit and reliable performance.
As a standard hardware component, it may serve multiple functions depending on your specific model.
Note: Be sure to consult your equipment’s diagram to confirm the correct location and application.
This item is sold individually.
Your Price
$6.30
In Stock
Bluebird Dethatcher Nut, Nylock 3/8-16
PartSelect Number PS9975971
Manufacturer Part Number 539976979
This genuine manufacturer-sourced hardware is specially produced for use with Bluebird lawn and garden equipment. This nut has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. It is a nut with a nylon collar insert which will resists turning if threaded on correctly, not this high-quality metal nut is sold individually.