Bluebird Aerator Hardware
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Bluebird Aerator Hardware
Your Price
$6.72
In Stock
Bluebird Aerator Washer 5/16 Std Flt
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS16381824
Manufacturer Part Number 596134901
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$6.72
In Stock
Bluebird Aerator Lawn Tractor Bolt 596039401
PartSelect Number PS16575300
Manufacturer Part Number 596039401
The carriage bolt attaches to the heavy washer and the front plate. This is a Husqvarna, Bluebird, and Poulan replacement part directly sourced from the manufacturer for use in lawn mowers. This item is available as an individual replacement part and is made of metal. A socket set may be needed during the replacement of this part. Over time this part may break or become stripped and will need to be replaced.
Your Price
$6.72
In Stock
Bluebird Aerator Bolt
PartSelect Number PS16381724
Manufacturer Part Number 595901601
This is a genuine OEM replacement part that is used for lawn mowers and tractors across a number of brands. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to remove or install this bolt.
Your Price
$6.72
On Order
Bluebird Aerator Hex Nut
PartSelect Number PS16382139
Manufacturer Part Number 596583702
This genuine manufacturer sourced replacement part designed for use with lawn mowers. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper use. This lock nut is made out of metal and it is sold individually. Would require a wrench to remove or install this hex nut.
Your Price
$6.72
In Stock
Bluebird Aerator Washer-15x7.3x1.6
PartSelect Number PS16381860
Manufacturer Part Number 596204101
This item has been sourced from the original manufacturer to be used with tillers and riding lawnmowers from Husqvarna and Poulan. This metal washer is used to provide spacing or to disperse pressure put on a part assembly across a wider surface area. It is recommended to review your model\\\'s diagram to verify the washer\\\'s usage and compatibility. This item is sold individually.
Your Price
$6.72
In Stock
Bluebird Aerator Washer 3/8 Flat
PartSelect Number PS16382049
Manufacturer Part Number 596433701
This is an authentic replacement part that has been sourced from the original manufacturer to be used with lawnmowers, stump grinders, dethatchers, aerators, and power rakes from Husqvarna, Bluebird, Poulan, and Jonsered. The washer is used with different types of equipment and the application of the washer can vary based on the model of the machine. This washer is priced as a single item.
Your Price
$6.72
In Stock
Bluebird Aerator Washer
PartSelect Number PS16382119
Manufacturer Part Number 596565301
This high-quality replacement washer is designed for use with a wide range of lawn and garden equipment. It plays a vital role in evenly distributing pressure between connected components, helping to ensure a secure and stable fit.
Made from durable metal, this standard hardware piece is sold individually and can be used in various applications depending on your equipment model.
Tip: Always refer to your model’s diagram to confirm the correct fit and placement.
Your Price
$6.72
In Stock
Bluebird Aerator Washer 1/2 Flat
PartSelect Number PS16381616
Manufacturer Part Number 595316401
This is an authentic replacement part manufactured for use with outdoor power equipment. The washer is used with different models of equipment and can have multiple applications. This washer is sold as an individual replacement part, please see model diagram for associative parts.
Your Price
$6.72
In Stock
Bluebird Aerator Hex Cap Screw 5/16-18 X 1
PartSelect Number PS16575424
Manufacturer Part Number 596580801
This is an authentic OEM component from Husqvarna. The hex cap screw 5/16-18 X 1 is constructed of heavy-duty metal, and is sold individually. This item often helps to secure various components in lawn tractors. You will need a wrench for the repair.
Your Price
$6.72
In Stock
Bluebird Aerator Lock Nut Pre
PartSelect Number PS16575320
Manufacturer Part Number 596135601
This genuine manufacturer-sourced part is specially designed for use with riding lawn mowers and garden tractors. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this nut. Keep in mind this high-quality part is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this component.