Wall Oven Hinges
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Wall Oven Hinges
Your Price
$117.51
In Stock
Wall Oven Door Hinge
PartSelect Number PS11744215
Manufacturer Part Number WP74008014
The hinges control the rate that the oven door opens and closes, and allows the door to stay open at an angle. This hinge can be used on either the left or right hand side of your oven, and is approximately 20 1/2 inches long. If your oven door will not open or close easily, you may need to replace this part. It may be a good idea to replace both hinges at the same time. If a spring has become loose on one hinge, the other hinge is likely to have the same issue. The repair is simple and only requires a Phillips screwdriver and a small bent nail. For a full step-by-step guide, check out the video below.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
William from Statesville, NC
Oven door wouldn't close completely
Parts arrived in three days and it was an easy swap of the hinges but the same problem still existed: the oven door wouldn't close completely, so the oven light stayed on and the convection wouldn't work either unless the door closed all the way. The replacement hinge's springs apparently aren't strong enough to close it and the springs aren't adjustable - which is a design flaw. I did correct the problem though, by using three dollars worth of 1" round magnets, which I placed inside the door: they stay put and are strong enough to pull the door tight.
Read more...
Your Price
$68.86
In Stock
Wall Oven Door Hinge - Left Or Right Side
PartSelect Number PS11744384
Manufacturer Part Number WP74010283
As per the manufacturer, when replacing the hinge, they recommend to also replace the hinge receptical also knows as the bracket. See related parts.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
MICHELLE from IMPERIAL, MO
Door would not close tight - light would stay on.
Replaced the hinges, the appliance never really shut 100% and after several year it got worse. Now it is perfect and we don't have any problem with heat up time of oven, used to take extra long to get to desired temp. Should have sent it back in the beginning.
Read more...
Your Price
$57.38
On Order
Wall Oven Range Door Hinge
PartSelect Number PS11742641
Manufacturer Part Number WP4455525
This is a door hinge for the oven door on your range. It allows the door of your unit to open and close without much effort. This hinge will also allow the door to stay open at different angles and hold that position. This part is sold individually and it works for both the left and the right side of your unit. You may need to replace this part if you are noticing that your appliance will not hold the open or closed positions properly.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
John from Columbus, KS
built-oven door wouldn't close all the way
First, insert pins or screws in the holes at the hinge pivot point. Then lift and pull the door out. Four screws remove the door front(2 top,2 bottom). Two screws remove each hinge. After installing the hinges, put the door front back on. Set the door back in the hinge slots, open the door all the way and remove the factory installed hinge pins and you're finished.
Read more...
Your Price
$90.63
In Stock
Wall Oven Door Hinge
PartSelect Number PS2080677
Manufacturer Part Number 74001984
This door hinge is a genuine OEM replacement part for your wall oven. Replacing this part will require partially removing your oven from the wall, to access the hinge. This part contains one hinge, although it is recommended to replace both at the same time. You will need a Phillips screwdriver to unscrew the hing assembly and install the new one.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Berit from PLANO, TX
Spring broke on door hinge
Turn off power,Lift up and remowe owen door.undo srews that holds owen to cabinet,pull owen out 7 inc.A second person needs to hold owen so it wont tip out.Remove plates on each side so you can see the hinges,romove screws that hold hingesin place,Remove old hinges place new hingesfrom this site .Secure all screws.Put owen door back.done.
Read more...
Your Price
$50.56
In Stock
Wall Oven Door Hinge
PartSelect Number PS11752379
Manufacturer Part Number WPW10299227
This passive oven door hinge is designed for use on either the left or right side of select ranges, ensuring smooth and controlled door movement. As a genuine OEM component, it helps restore proper door function by allowing the oven door to open and remain at a stable angle. The passive designation indicates that the spring mechanism is sold separately. Constructed for durability and precision, this hinge is compatible with a wide range of models across Whirlpool and affiliated brands. Replacement is recommended when the door no longer opens or closes smoothly. Before installation, consult your appliance’s service manual to confirm compatibility and follow safety procedures.
Fixes these symptoms
- Door won’t close
- See more...
Your Price
$7.47
In Stock
Wall Oven Reciever Hinge
PartSelect Number PS8760079
Manufacturer Part Number W10647259
Fixes these symptoms
- Door won’t close
- See more...
Your Price
$131.70
Special Order
Wall Oven Hinge Assembly (nuova Star Silver)
PartSelect Number PS16628726
Manufacturer Part Number DE81-04349A
Looking for a quick and straightforward solution to your broken stove knob? The Whirlpool Range Control Knob is here to help. This authentic Whirlpool part is a perfect fit for several Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef stove, oven, and range models. The knob?s primary purpose? To give you total control over your surface element's heat. So even with small variances in size or shape, this knob secures neatly onto its post and helps make your cooking experience hassle-free. Remember, checking your model's compatibility before purchasing is key - we want you to have a seamless installation and have your appliance working like a dream. With the Whirlpool Range Control Knob, regain effortless control of your cooking.
Your Price
$59.47
In Stock
Wall Oven Door Hinge
PartSelect Number PS11747291
Manufacturer Part Number WP9760575
Provide superior support to your oven door with this Door Hinge from Whirlpool. Designed specifically for the right side, this genuine OEM part ensures optimal functionality. It expertly controls the rate at which the door opens, as well as allowing the door to stay open at a designated angle, providing convenience and versatility. Made to fit a variety of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models, this hinge is your complete solution for oven door support. Installation of this part should be done with work gloves to ensure safety. Opt for this genuine Whirlpool door hinge for superior performance and lasting durability.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
William from Dumfries, VA
Inside oven door glass was broken and door was not closing completely.
I removed the door from the oven by locking the hinges with the built-in locks leaving the door open about 20 degrees. the door can then be lifted slightly off the hinges and pulled out at the bottom while tilting the top inward to remove it from the oven. With the door laying on a suitable surface with the outside face down, I removed about 6 or 8 screws from the door inside panel freeing the springs and the inside panel from the middle and front panels. Care must be taken to note from which locations the pointed self-taping screws come as opposed to the narrower-thread machine screws that hold the springs. Note: The inside panel does not need to be removed! Once the inside panel is freed from the inner panels, using suction cups the glass can be lifted slightly and slid toward the bottom of the door, rotated slightly, and removed through the window hole in the back face of the door. The new glass is installed in a similar way using suction cups by maneuvering it at a angle through window hole and into its frame. The hinges were replaced by lifting the bottom of the inner door panel slightly to clear the hinge and swapping in the new ones. Be sure to observe the difference between the left and right hinges in the location of the screw hole at the bottom of each hinge The narrow-thread machine screws that hold the hinges to the inside panel should be installed first while you can get you hand inside the door to hold each hinge in alignment with the screw holes while you start each screw. Re-install the pointed self tapping screws by pressing down on the rear panel to collapse the spring-action glass frames within the door so that the short screws will reach their threaded hole. Be careful to back off the self tapping screws first until you feel a click into the original threads to avoid stripping the holes. Last re-install the door on the oven. The replacement hinges should have come with the springs already "cocked" with the built in locks in place. Install the door with it in tan almost-closed position by sliding the hinge extensions into the slots in the oven. Once the extensions are properly in the slots the door can be fully opened and the built-in hinge locks re-positioned to the unlocked position to allow the door to fully close. Should you accidentally release only one of the hinge locks in trying to insert the hinge extensions into the slots you will have to reset the hinge. If the door is free from the oven, this may require a pair of heavy pliers, like channel lock pliers, to re-tension the hinge spring and "cock" the hinge extension by re-positioning the built-in lock in the locked position. If the hinge lock on one side of the door releases, but the the opposite side hinge extension is not fully inserted into the oven slot I recommend carefully moving the door to the fully open position, being careful to avoid twisting the inserted spring's extension, so that the hinge lock can be re-positioned to the locked position, the door full removed, and start again to install it. It helps to have two persons to hold opposite sides of the door for this operation as the door is heavy, but not essential. When in the proper position the hinge extensions may not appear fully inserted, but this is normal to allow for closing of the built in locks. It helps to observe how much of the hinge extension is exposed either before removing the door initially, or, if you have a double oven, looking at the hinges on the door of the other oven. Good luck with your repair.
Read more...
Your Price
$56.33
In Stock
Wall Oven Door Hinge
ordered parts
too many glasses and no insulation ( no insulation in oven door when taken apart!
Got the correct parts on order via a second sales person!
Installed glass hinges, insulation and closed the door! and instaleed the oven door!
The U TUBE videos were exstremely helpful! Read more...
PartSelect Number PS11747290
Manufacturer Part Number WP9760574
This hinge is for a stainless steel door and is located on the left side of the oven door.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Robert from MCGAHEYSVILLE, VA
cleaning oven door, fell on floor and broke inner door glasses
took apart and empty the broken glass! ordered parts
too many glasses and no insulation ( no insulation in oven door when taken apart!
Got the correct parts on order via a second sales person!
Installed glass hinges, insulation and closed the door! and instaleed the oven door!
The U TUBE videos were exstremely helpful! Read more...
Your Price
$50.56
In Stock
Wall Oven Door Hinge
PartSelect Number PS11754748
Manufacturer Part Number WPW10440013
Upgrade the functionality of your range with this high-quality oven door hinge from Whirlpool. Designed to optimise the operation of your oven door, this hinge controls the rate at which the door opens and keeps it steadily open at an angle when required. Engineered for use with select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef oven models, this hinge ensures a reliable and secure attachment to the left or right side of the door. As a genuine OEM part, it promises excellent durability and performance. Remember to verify that this part is compatible with your specific model before purchase. Please use work gloves for safety when installing.
Fixes these symptoms
- Door won’t close
- See more...