Tiller Hoses and Tubes

Tiller Trimmer Primer And Hose Assembly This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

Tiller Fuel Line Filter Assembly

★★★★★

★★★★★

1 Review

Fuel Line Filter Assembly

Tiller Engine Fuel Tube Grommet

Tiller Trimmer Fuel Return Line

★★★★★

★★★★★

2 Reviews

The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.

Tiller Trimmer Fuel Line And Filter

★★★★★

★★★★★

2 Reviews

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

Tiller Engine Primer Line This primer line hose, which measures 18-3/4 inches long is a crucial component in your outdoor power equipment. It delivers fuel from the primer bulb to the carburetor, providing the initial fuel boost to start the engine. If you notice fuel leaks, cracks, or visible wear on the hose, it means that it is broken. Additionally, a spongy primer bulb or the failure to deliver fuel to the carburetor when pressed are signs of a malfunctioning primer line hose. When this happens, your machine will be difficult or impossible to start. To remove the hose from your machine, disconnect it from both the carburetor and the primer bulb with pliers or a screwdriver. Please note that this replacement part is sold individually as an authentic OEM component.

Tiller Edger Fuel Line Fitting / Filter This genuine OEM fuel line fitting or filter in your lawn equipment ensures clean fuel flow from the tank to the engine in your lawn equipment. It effectively removes debris and impurities, safeguarding the engine from potential damage. Typically located along the fuel line, it is close to the fuel tank or engine. You can tell if it is broken or clogged if there are signs of fuel leakage, reduced fuel flow, or if the engine fails to start or run smoothly. If the fuel line fitting or filter is not replaced, it can lead to poor engine performance, fuel starvation, and potential damage to the engine components. To remove it, you will need a screwdriver, pliers, and a socket set. Disconnect the fuel hose from the carburetor, drain the tank, and unbolt the fuel tank. Then, detach the fuel line and use a socket to remove the fitting. Remember, this replacement part is sold separately from the rest of the fuel line assembly.

Tiller Snow Blower Breather Hose A breather hose is used within the ventilation system for a crankcase, or engine, to connect the crankcase to the air manifold and allow hot air to escape. This genuine OEM breather hose is made of a high-quality rubber and is designed for use and compatible with several different makes and types of outdoor power equipment, such as lawnmowers, tillers, engines, log splitters, and snowblowers. Due to the build material of this hose, it can break down over time and through exposure to gas, oil and excessive heat. If you notice any damage on the hose, fuel leaks or worsened engine performance resulting in rough idling or stalling, this hose may be damaged or simply need replacing. To replace this hose, locate the hose on your model and remove any clamps, before pulling off the old hose and installing the new, with any necessary hardware such as clamps.

Tiller Fuel Line

Tiller Snow Blower Fuel Line Kit