Tiller Belts

Tiller Lawn Mower Ground Drive Belt

★★★★★

★★★★★

1 Review

This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measuring 3L x 35.80 inches, this belt is sold individually. A wrench may be needed for installation, depending on your equipment model.

Tiller Forward Drive Belt

★★★★★

★★★★★

1 Review

The Forward Drive Belt is a 12.5-inch black, rubber belt, sold individually. Installation of this manufacturer-certified part is rated as "Easy" by customers and will require pliers, a socket set, and a wrench set. This part is used to transfer power from the engine's drive pulley to the transmission. If broken due to wear/fatigue/damage, the drive wheels will no longer be able to propel the mower, and the part should be replaced. This belt attaches between the engine drive pulley and the transmission's drive pulley. Refer to your make, model and diagrams to ensure this part is right for you.

Tiller Belt-v Rev Drv 3 The Reverse Drive Belt is a 13 x 3/8 inch is a black rubber belt which attaches to the transmission and engine drive pulleys. This belt allows you to drive the unit backwards. If it's broken due to fatigue, or damage, you will no longer be able to drive backwards and the part must be replaced. Installation is rated as "Easy" by customers and requires pliers, a socket set and a wrench set. Refer to your make, model and diagrams to ensure this is the right part for you.

Tiller Belt, V

★★★★★

★★★★★

1 Review

This genuine OEM replacement drive belt is designed for use with rotary lawn mowers and garden tillers, providing a reliable connection between the engine and the cutting or tilling mechanism. Made from high-quality, durable rubber, this belt is built to withstand regular outdoor use and is sold individually. Replacing the belt is a relatively simple task that requires only a screwdriver. To perform the repair, first disconnect the spark plug to ensure safety. Then, remove the belt cover to access the old belt. After removing the worn belt, install the new one in its place, secure the cover, and reconnect the spark plug. Always consult your equipment’s manual for model-specific guidance and safety precautions.

Tiller Forward Drive Belt This forward drive belt is a genuine replacement component designed to restore smooth and reliable operation to compatible tillers. Known as a 7PK597 multi-rib poly V belt, it connects the engine to the drive system, enabling forward motion and traction. Made from durable rubber, it resists wear and slippage, ensuring consistent performance in demanding outdoor conditions. If your tiller is experiencing reduced traction, slipping, or a non-functioning drive system, replacing the belt may resolve these issues. Installation involves accessing the drive assembly and securing the new belt in place. This part is compatible with select Powermate and Southland tiller models—verify fit before installation.

Tiller Belt-forward Drive This forward drive V-belt is used on rear-tine garden tillers to transfer power from the engine to the transmission for forward movement. Built for durability and consistent grip, it helps maintain smooth operation of the drive system. It’s a direct replacement for worn or slipping belts to restore proper tiller performance and traction.

Tiller Reverse Drive Belt A reverse drive belt is used within outdoor power equipment within the transmission to enable the reverse gear functionality and allow the user to move the equipment backward. This reverse drive belt is a 5Pk740 belt, meaning it is a multi-ribbed V-profile and measures 740mm in length/circumference. This belt is made of high-quality materials and connects directly to the reverse tensioner pulley in various models of tillers and is sold as an individual part. Over time and due to heat, friction, and stretching, this belt can eventually wear down. If you notice poor performance from your tiller when reversing or hear squealing and other unusual noises, inspect both drive belts for any signs of visible damage. To replace this drive belt, make sure the engine is cool and disengage the spark plug cap. Use a wrench to remove the belt guards on top and below the belt, if necessary. Then, using 2 wrenches, disconnect and remove the securing idler bolt and any washers, after which you can remove the belt through the bottom of the unit. Check to make sure the forward drive belt is in good condition before you install the new reverse drive belt. Pull the reverse drive belt up through the bottom of the unit and install it to the appropriate pulleys and tension wheel, followed by any washers and the securing bolt which you will need to tighten. Then simply replace the belt guards if applicable.

Tiller V-belt 4l 027.17

★★★★★

★★★★★

1 Review

The Forward Belt is an individually sold, black rubber part used to drive the wheels and tines foward. It attaches around the engine foward pulley and the transmission pulley. Installation is rated as "Easy" and will require a wrench set, pocket set and pliers. If damaged or broken (likely due to fatigue) you will no longer be able to drive the unit, and the part must be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

Tiller Belt-v 1/2x58.160 This heavy-duty tiller drive belt is designed to transfer power reliably within rear-tine tiller drive systems. Reinforced with high-strength aramid fiber cords, it resists stretching and handles demanding soil-working conditions with consistent performance. Built for durability and dependable power delivery, this belt is an ideal replacement for worn or slipping drive belts to help restore smooth tiller operation.

Tiller Belt.tiller.drive A genuine item which is supplied directly from the original equipment manufacturer for use with Poulan and Weed Eater tillers. It is a high-quality replacement for the v-belt which is responsible for the reverse functionality of the unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Over time the material may wear out and begin to stretch eventually requiring a replacement to ensure peak performance. Keep in mind this durable rubber belt is sold individually.