Screwdriver Switches

This is a VSR (Variable Speed Reverse) switch used in various power tool models, including hammer drills and power screwdrivers. The VSR switch serves to power the tool on and off, as well as control the motor speed and direction. Over time, the VSR switch may malfunction, resulting in your tool not turning on or changing speeds as intended. If you observe difficulties with your power tool, it is likely that the switch needs replacement. Please note that this switch is sold individually and does not include any additional hardware, such as screws or wires. Replacing the switch is a straightforward process that only requires a screwdriver or drill. Start by disconnecting your tool from its power source, whether it is a power cord or battery, and then remove the screws on the side of your tool to access the inner housing. Disconnect the wires attached to the old switch, followed by removing the switch itself. Install the new switch and connect its motor wires first, and then the power supply wires. Once all the wires are securely attached, reassemble the housing and fasten it with the necessary hardware.

This genuine Makita part is made by original manufacturer. This item fits drywall screwdrivers and other handheld power tools. Switch trigger is made of plastic material. Reversing switch lever is included in this part. This easy repair requires only a screwdriver to remove tool casing for switch installation.

This genuine manufacturer-sourced component which is specially made for use with Makita screwdrivers. It is the part of the tool handling on/off operations, unfortunately, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality plastic body switch is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this part.

This is an original DeWalt replacement part manufactured for use with cordless screwdrivers. The variable speed switch is used to relay electricity from the power cord to the motor. The switch includes the lead wires and direction switch, please note the forward/reverse button is available separately. This switch changes speed by the pressure applied to the switch, so the lighter pressure the slower speed and when the pressure is increased the speed increases. The switch is sold as an individual replacement part.

This is a genuine manufacturer-approved replacement switch that is utilized on a Makita cordless impact driver. It is the part of the tool that allows a user to change the rotation direction of the bit. Over time switch may develop either electrical or mechanical issues eventually failing and requiring a replacement. This durable plastic body switch is sold individually, please note the changing lever is sold separately.