Saw Switches

Intermittent motor operation, a sticking trigger, or failure to start can point to a damaged saw switch, but several nearby components can cause the same symptoms. Check the battery charge, terminals, lockout button, loose wires, and control electronics before ordering a replacement. The switch mounts inside the handle and responds when the operator presses the trigger after releasing the safety lock. Match it to the exact tool model and serial prefix. Remove the battery and cutting blade before service, then note the position of each wire and terminal. Avoid pinched wires during reassembly. Test that the lockout blocks accidental starting and that the motor stops when the trigger is released.

This switch activator button is a genuine Makita replacement part, It is sold individually. It has to be pressed to activate the power switch. This is a very common replacement part. It is advised to order one or two extra to keep on hand. This Makita switch button is compatible with the tools listed below, and it is not guaranteed to fit any other power tool models.

This replacement switch is specially designed for a Milwaukee sawzall. It is an authentic OEM sourced item, not a aftermarket imitation. This switch is used to turn the tool on and off. Since switches have moving mechanical parts, they will eventually wear out requiring replacement. This witch has a plastic body and it is sold individually. To replace this switch you would need a screwdriver. • Make sure the unit is unplugged • Remove the housing • Disconnect wires from the old switch • Remove the old switch • Secure the new switch • Reassemble and test the tool

Genuine OEM Replacement Part used on some Makita Saws. This part is Sold Individually. A switch handles the on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.

Restore reliable performance to your Delta power tools with this genuine manufacturer-approved replacement switch. Designed for select Delta models, this part controls the on/off function and is a common replacement due to regular wear and tear. Over time, the internal components of switches can wear out, making replacement necessary to keep your tools running safely and efficiently. This switch is sold individually and is built to meet the original equipment standards for quality and durability. Whether you're repairing a favorite tool or performing routine maintenance, this part helps ensure smooth operation and dependable control.

This is an genuine OEM sourced replacement part used on Milwaukee electric drills/drivers and sawzalls. Switch is a crucial part of the tool which handles on/off operations. Because switches use mechanical internals, they will tend to wear out over time, eventually requiring replacement. It has a plastic body and it is sold individually. To replace this switch you would need a Screwdriver. • First you want to remove screws used to secure two pieces of housing set • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

This authentic Skil replacement part is responsible for controlling the on and off function of a saw. If your unit randomly stops or it takes several pushes on the trigger to get it going, installing a new switch may resolve the issues. Please note this plastic switch is sold individually. Includes four (4) screws. To complete this repair job you will need a screwdriver. • Remove housing screws • Separate housing from the main unit • Take a note of how the wires are connected • Disconnect wires from the old switch • Remove the switch and secure new one in place • Reconnect the wires • Reassemble the housing and test the unit