Sander Switches

This is a Genuine Manufacturer Sourced replacement part used on Makita Sanders. This switch has a Plastic Body and Trigger. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing

This is a Rocker type switch that has internal terminals. This is a genuine Makita replacement part that is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows:rn • The tool has completely stopped functioning - it will not start. rn • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all.rn • The variable speed function and electric braking aren't working properly.

This is an authentic manufacturer sourced replacement part used on Makita sanders/polishers. Switch is an important part of the tool which handles on/off operations. Because switches use mechanical internals, they will tend to wear out over time, eventually requiring replacement. It has a plastic body and it is sold individually. To replace this switch you would need a Screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

This is an authentic replacement part for a Porter Cable Orbital Sander. This part is used to control the speed of the motor with 1 being the lowest speed setting and 6 being the fastest. The speed can be adjusted while the motor is running or while it is stopped. This part is sold as an individual replacement part. Please see your model's diagram for any parts associative to this.

This is a genuine Powert Cable replacement part manufactured for use with sanders. The two position switch is used to power the machine on and off. The switch fits inside the housing, and is actuated by the switch slide, and switch button. The switch is sold individually, please see model diagram for any additional parts.

It is a genuine replacement part that is supplied by the original manufacturer, it is specially designed for use with Jet and Wilton sanders. The switch allows a user to turn the unit on and off, over time mechanical switches may wear out and begin to fail eventually requiring a replacement. It is a high-quality plastic body switch which is sold individually.