Murray Snow Blower Hardware

Murray Snow Blower Shear Bolt Kit This is an original replacement part manufactured for use with Craftsman snow throwers. The special bolt is used to secure the auger blade to the axle. The bolt is used as a safeguard if the blade gets caught or stuck the force will snap the bolt rather than breaking more expensive parts like the auger transmission. The bolts are sold in pairs and include the nuts and washers, the bolt sets are sold as individual sets.

Murray Snow Blower Shear Pin Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A Shear Pin will break when you hit a large chunk or ice or other debris. Once it is broken, it will need to be replaced. You will need pliers to complete this repair. Customers rate this repair as Easy.

Murray Snow Blower Pin, 3/32 X 1.6 The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

Murray Snow Blower Lawn Mower Flat Washer This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Murray Snow Blower Lawn Mower Hex Head Washer Screw This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

Murray Snow Blower Lawn Mower Nut This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Murray Snow Blower Lawn Mower Washer This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

Murray Snow Blower Washer, 3/8 It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Murray Snow Blower Washer - Flat This replacement washer is a genuine OEM sourced part. It is commonly used on a variety of Murray riding lawn mowers and tractors. Washers helps to distribute the pressure evenly between two connected parts. This washer is generally used to help securing mower wheels. For proper application please refer to diagrams of your model. This metal washer is sold individually. When replacing it you should only need a wrench to remove the lock nut that secures the wheel to the axle.

Murray Snow Blower Nut, #10-24 Hex Flange Lock This is an OEM part for a variety of machines. The purpose of this Flange or Lock Nut is to hold parts in place while resisting loosening. It is made of metal, is not part of a kit or assembly, is sold individually, and is gold in color. This part will need to be replaced when the threads are stripped or if it has become worn or damaged. You will need a wrench or socket set and a torque wrench to complete this repair. Torque the nut to the manufacturer recomendations. Customers rated this repair as Easy.