Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
July 13, 2021
Fan buttons work fine. Light button only works occasionally - very temperamental. Thought to replace panel? Could be ground wire? Grease collected causing fail? When it works we leave the lights on low, then electrical service outage and cannot turn on lights - fan no problem.
For model number ZV850SB3SS
Hello James, Thank you for the question. Normally this would indicate a defect in the Control Board. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
What is the replacement for GE range hood zv850sb3ss?
For model number ZV850SB3SS
Hello Catina, Thank you for contacting PartSelect.com. Very sorry but we do not sell appliances, just parts. For more specialized assistance or to speak with someone about this, we would suggest calling GE. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Two years ago (approximately) the lights quit working. I replace the bulbs with ones from the local hardware store; didn't work; replaced fuses; didn't work; replaced circuit board, didn't work; finally, ordered expensive recommended part and replaced fuses purchased at local dealer, WORKS! The bulbs I purchased locally were 50watt not 2
... Read more0. I had 2 different repairmen (one GE rep) look at it,and neither one solved the problem. But it's fixed now!
Removed unit by removing two mounting screws attaching socket to range hood. Removed adjacent filter panel, pulled socket out through opening, and removed two screws attaching ceramic insulation base to socket. Reinstalled in reverse order.
