ZT3500B2548 (5901408) Simplicity Lawn Mower - Overview

This authentic OEM sourced replacement wheel is specially designed for use with Snapper, Simplicity and Murray lawn mowers and tractors. It is the wheel for the mower deck, it will help to support its weight and assist in turning. This wheel is made out plastic material and it is sold individually. Replacing this deck wheel is a simple task that should only require a set of wrenches.

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

Introducing the starter solenoid from Simplicity specially designed to ensure your lawn tractor operates smoothly and efficiently. This solenoid plays a crucial role in sending battery current to the engine starter as you turn the ignition switch into the start position. Made from high-quality materials and crafted with careful attention ...Read moreto detail it serves as a durable and reliable addition to your lawn tractor machinery. Before installing remember to disconnect the battery and make sure to wear work gloves for your safety. This solenoid is included in a kit for your convenience. Trust Simplicity for all your lawn tractor parts needs.

This is a genuine OEM sourced part which is specially designed for use with Murray, Snapper and Simplicity lawn mowers. It is an identical replacement for a missing or a faulty spring that was installed on a new unit. This high-quality component is made of durable metal and is sold individually. Please make sure to refer to the appropriat...Read moree diagrams of your model for the correct location and application of this spring.

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This part is available individually and is made of plastic and metal. The limit switch connects to the interlock and helps to turn off the engine if there is a problem. A wrench might be required during the replacement of this part. It will require replacing if it becomes broken. This is a Murray, Snapper, and Simplicity replacement part directly sourced from the manufacturer for use in lawn tractors.

This is an authentic replacement part manufactured for use with rear engine mowers and lawn tractors from Craftsman. The user will need to replace this hex nut if it is missing or not working correctly. This hex nut screws onto the transmission link lever. This part is made of durable material and sold individually.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or a faulty vented cap that is specially designed to keep the fuel in the tank, please make sure to refer to the appropriate diagrams ...Read moreof your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable plastic and is sold individually.