This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse ...Read moreis at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair.
NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
This switch monitor interlock is a critical safety component designed to ensure proper communication between the microwave door latch and the control board. When functioning correctly, it confirms that the door is securely closed before allowing the microwave to operate. A damaged or faulty switch may prevent the unit from starting, even ...Read moreif the door appears latched. Replacing this genuine part restores safe and reliable operation. Installation should be performed with care, and it's recommended to disconnect power before beginning any repair.
Introducing the GE Microwave Thermostat - a vital safety component for your microwave. Crafted with precision, this thermostat is specifically designed to prevent overheating scenarios which can cause hazards. Its main function is to promptly cut off power and shut down the microwave if a potential overheating problem is detected. Due to ...Read morethe potential risks associated with high-voltage capacitors within the microwave, the installation of this part should ideally be handled by a professional service technician. Invest in this GE Microwave Thermostat for optimal safety and maximum performance of your appliance. Trust GE for reliable and safe microwave operation.
This diode cable is a replacement electrical component designed to regulate current flow within an appliance circuit. It helps protect sensitive components and is commonly replaced when electrical faults or power irregularities occur. Proper application should be verified before installation.
If your microwave’s turntable isn’t rotating smoothly, the roller guide may be the issue. Positioned beneath the glass tray, this component helps ensure even spinning during operation. Designed for select models, it’s a direct replacement that restores proper movement and supports consistent heating. Be sure to check your microwave’s model number before purchasing to confirm compatibility.
This GE Turntable Shaft, also known as a Shaft Turntable, is an essential component for your microwave. Manufactured by trusted brand, GE, it is designed with precision to ensure your microwave's turntable rotates smoothly and efficiently. This high-quality piece sustained its function under regular wear and tear, ensuring long-lasting pe...Read morerformance and durability. It's perfect for when your existing shaft turntable needs replacement or simply an upgrade for optimal functionality. Trust your appliance's performance to the reliable build and design of GE products.
This capacitor delivers the electrical boost required for motors to start and operate efficiently. Proper capacitance reduces strain on motor components and helps prevent startup failures or inconsistent performance. Replacing a weakened capacitor restores smooth motor operation and supports long-term reliability.
Enhance the functionality of your GE appliance with this authentic MICA COVER. Designed with distinguished features, this part is essential for ensuring the optimum performance of your appliance. Made from high-quality mica, this cover is intended to deliver lasting durability. It serves as a protective layer, safeguarding your appliance ...Read morefrom potential damage. Easily installable, it locks onto your device with minimal effort. Opt for this dependable GE MICA COVER to upgrade your appliance and experience a superior functionality.
This range ceramic light lens covers and protects the interior light bulb, allowing clear illumination of the cooking area while shielding the bulb from heat and debris. Made from durable, heat-resistant glass, it helps maintain visibility during use and supports safe operation of the appliance. Replacing a cracked, broken, or discolored ...Read morelens restores proper lighting and helps keep the interior looking clean and functional.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave completely stopped working
968 of 1266 peoplefound this instruction helpful.
Kim from Cliffside Park, NJ
Really Easy
15 - 30 mins
Screw drivers
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic
... Read morerowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Read less
Was this helpful?
Thank you for voting!
I diagnosed the problem incorrectly: based on a previous repair.
66 of 141 peoplefound this instruction helpful.
Ralph from Brandon, FL
Easy
Less than 15 mins
Pliers, Screw drivers
The old fuse is perfectly good. The new ones arrived within a day.
Was this helpful?
Thank you for voting!
appliance stopped working -- no readout on screen
24 of 24 peoplefound this instruction helpful.
Carolyn from ARMONK, NY
Easy
30 - 60 mins
Screw drivers
1. turned off electricity -- unplugged the unit 2. removed 3 screws on top of top vent, removed vent screen then I located the little white cylindrical fuse and popped it out with a table knife. Then I popped in the new fuse. Replaced the vent screen and screws
... Read more -- plugged in the appliance and it is working again.