Models > ZISW480DXA

ZISW480DXA General Electric Refrigerator - Overview

Sections of the ZISW480DXA

[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: WR55X10025
Temperature Sensor
★★★★★
★★★★★
(66)
PartSelect #: PS304103
Manufacturer #: WR55X10025
This sensor (Temperature Sensor, Thermistor, Refrigerator Temperature Sensor) sends the temperature reading of the compartment to the control board. If you notice your refrigerator is too warm, too co...
$27.00
  In Stock
Order within the next 3 hrs and your part ships today!
Ice Maker – Part Number: WR30X10093
Ice Maker
★★★★★
★★★★★
(77)
PartSelect #: PS1993870
Manufacturer #: WR30X10093
This 10 by 5 inch ice maker (Electromechanical Icemaker Kit, Ice Maker Assembly) produces ice. This particular model will produce seven crescent shaped cubes every cycle. It is constructed of plastic ...
$216.23
  In Stock
Order within the next 3 hrs and your part ships today!
Dispenser Door Assembly or Flapper – Part Number: WR17X11653
Dispenser Door Assembly or Flapper
★★★★★
★★★★★
(87)
PartSelect #: PS964304
Manufacturer #: WR17X11653
This “Dispenser Door Assembly” (Door Recess Assembly, Ice Door Assembly, Dispenser Door, Refrigerator Dispenser Ice Chute Door Kit, Dispenser Door Flap, Ice Chute Door, Flapper) keeps the room air fro...
$15.58
  In Stock
Order within the next 3 hrs and your part ships today!
Evaporator Fan Grommet - Red – Part Number: WR02X12008
Evaporator Fan Grommet - Red
★★★★★
★★★★★
(21)
PartSelect #: PS963756
Manufacturer #: WR02X12008
If you notice that your refrigerator or freezer is noisy or too warm, you may need to replace the evaporator fan grommet. This part is red in color, and is about 1 inch in diameter. The evaporator fan...
$13.21
  In Stock
Order within the next 3 hrs and your part ships today!
Dispenser Door Solenoid Assembly – Part Number: WR62X10055
Dispenser Door Solenoid Assembly
★★★★★
★★★★★
(33)
PartSelect #: PS1483583
Manufacturer #: WR62X10055
This part is a possible option when ice door won't open or shut properly or when water is not dispensing.
$64.74
  In Stock
Order within the next 3 hrs and your part ships today!
DISPENSER LIGHT – Part Number: WR01X37886
DISPENSER LIGHT
★★★★★
★★★★★
(18)
PartSelect #: PS16554837
Manufacturer #: WR01X37886
This twelve volt dispenser light bulb is a little under two inches long.
$17.85
  In Stock
Order within the next 3 hrs and your part ships today!
Light Switch – Part Number: WR23X10725
Light Switch
★★★★★
★★★★★
(59)
PartSelect #: PS8758429
Manufacturer #: WR23X10725
The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw...
$8.56
  In Stock
Order within the next 3 hrs and your part ships today!
Evaporator Fan Motor – Part Number: WR60X10185
Evaporator Fan Motor
★★★★★
★★★★★
(20)
PartSelect #: PS1019114
Manufacturer #: WR60X10185
This evaporator fan motor circulates air to the fresh food compartments for efficient cooling. It powers the evaporator fan that draws air from the refrigerator and circulates it over the evaporator c...
$132.03
  In Stock
Order within the next 3 hrs and your part ships today!
Compression Ring – Part Number: WR02X12149
Compression Ring
★★★★★
★★★★★
(2)
PartSelect #: PS1015726
Manufacturer #: WR02X12149
This compression ring is meant to hold the evaporator fan motor in place in the freezer compartment of your refrigerator. This is is a genuine OEM part. The tools needed to complete this repair are a ...
$9.88
  In Stock
Order within the next 3 hrs and your part ships today!
Dispenser Door Recess Crank – Part Number: WR17X10706
Dispenser Door Recess Crank
★★★★★
★★★★★
(1)
PartSelect #: PS291908
Manufacturer #: WR17X10706
The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty k...
$13.84
  In Stock
Order within the next 3 hrs and your part ships today!
Lid Bumper – Part Number: WR02X10540
Lid Bumper
★★★★★
★★★★★
(2)
PartSelect #: PS284979
Manufacturer #: WR02X10540
The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down o...
$10.97
  In Stock
Order within the next 3 hrs and your part ships today!
Dispenser Housing Shield – Part Number: WR17X11170
Dispenser Housing Shield
★★★★★
★★★★★
(7)
PartSelect #: PS292255
Manufacturer #: WR17X11170
This part helps to contain parts for the ice and water dispenser. The overlay and dispenser board is attached on the front of the housing shield.
$20.48
  In Stock
Order within the next 3 hrs and your part ships today!

Questions And Answers for ZISW480DXA

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the ZISW480DXA

[Viewing 24 of 24]
Fridge too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Light not working
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer section too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not dispensing water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge too cold
Fixed by
these parts
Fixing
Show All
Freezer not defrosting
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door Sweating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t open or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge runs too long
Fixed by
these parts
Fixing Fixing
Show All
Freezer too cold
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker dispenses too little ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker dispenses too much ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Clicking sound
Fixed by
these parts
Fixing Fixing
Show All
Won’t start
Fixed by
these parts
Fixing Fixing
Show All
Doesn’t stop running
Fixed by
these parts
Fixing
Show All
Too cold
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
my refigerator was warm but the freezer was cold and working correcttly
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.

I went on line to see if there were others having this same problem and found that there were many with the same problem.
Parts Used:
Temperature Sensor
  • michele from North Smithfield, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
268 of 337 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator was getting too cold
I removed the old temperature sensor by cutting the wires. I attached the wires of the new sensor with wire nuts and mounted it in the same bracket.
Parts Used:
Temperature Sensor
  • Larry from Menomonie, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
142 of 197 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sticking Light Switch
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Parts Used:
Light Switch
  • Jonathan from Lilburn, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
116 of 144 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!