ZHP304ETV2SS General Electric Wall Oven - Overview

Diagrams for ZHP304ETV2SS

See every part. Know exactly what you need.

Parts for the ZHP304ETV2SS

$30.53

Temperature Sensor

★★★★★

(56)

Part #WB21X22134

The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is havi...Read more

Read less

$16.05

Door Handle Fastener

★★★★★

(11)

Part #WR01X11007

This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.

$35.80

Range Board Sensor

Part #WB27X28659

$18.59

NUT

Part #WB02T10017

$39.43

HUB BLADE Assembly

★★★★★

(1)

Part #WB02T10289

$19.50

Screw

Part #WB01X24735

$18.22

SCR 8-18 AB IHW 3/8 SN

Part #WB01K10042

$18.22

Replacement Screw For Range

Part #WB01X26995

Scr 8-18 ab x 5/16s

$18.22

SCR 8-18 AB TRP 3/8 Stainless Steel

Part #WB01K10086

$16.08

Front Bumper Frame

Part #WB02X28738

$16.05

CAPACITOR MOTOR

Part #WB27T10662

$38.96

BRACKET ANTI TIP

Part #WB02K10237

This part is the replacement anti-tip bracket for your oven. The anti-tip bracket is found on the outside of the oven, on the bottom, back wall. The anti-tip bracket connects to the oven wall and prevents it from moving in the cabinet. If your anti-tip bracket is damaged, you may notice some movement in the oven, and when this occurs, it ...Read more

Read less

Common Symptoms of the ZHP304ETV2SS

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Element will not heat

Little to no heat when broiling

Fixed by
these parts

Show All

Door won’t open or close

Fixed by
these parts

Show All

Videos related to the ZHP304ETV2SS

Watch our pros, then fix it yourself.

Replacing the Temperature Sensor

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven would go in to a F2 Error

148 of 226 people found this instruction helpful.

Peter from stamford, CT
Really Easy
15 - 30 mins
Nutdriver

Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.

Was this helpful?

Oven wouldn't preheat above 300 degrees

54 of 95 people found this instruction helpful.

Gerald from Cape Canaveral, FL
Really Easy
15 - 30 mins
Nutdriver

Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.

Was this helpful?

I kept getting An F2 error and the temperature did not seem accurate

29 of 38 people found this instruction helpful.

Chad from Bloomington, IN
Really Easy
Less than 15 mins
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

1) pull out the stove
2) remove the 7 sheet metal screws holding the back panel on. (the panel that also covers where the cord splits and connects to the oven.
3) Find the small plastic connector located in the middle of the back of the range and unplug it.
4) open the front of the oven and remove the one screw holding in ... Read more

Read less

Was this helpful?