Models
>
ZGP364LDR5SS
ZGP364LDR5SS General Electric Range - Overview
Sections of the ZGP364LDR5SS
[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS1020128
Manufacturer #: WR01X10590
This refrigerator door handle mounting screw connects your refrigerator door to the handle. The part is less than 1 inch in length, and can come in both silver and gold colors. When installing this sc...
$8.06
In Stock
Ignitor Mounting Screw
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
In Stock
Mounting Screw
PartSelect #: PS234786
Manufacturer #: WB1X5364
This screw is less than 1/2 inch in length. It is sold individually.
$8.77
In Stock
Screw
PartSelect #: PS221932
Manufacturer #: WB01K10002
Size: 8-32 inch Sold individually.
$20.93
In Stock
Handle Spacer
PartSelect #: PS221948
Manufacturer #: WB01K10020
This spacer is located between the handle and the outside door panel. They are sold individually, and are usually recommended to be purchased in pairs.
$8.16
In Stock
Questions And Answers for ZGP364LDR5SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
July 6, 2023
The stove top burner switch is continually calling for ignition. The clicking doesn't stop.
For model number ZGP364LDR5SS
Hello John, thank you for the inquiry. According to our research, we would recommend checking the harness burner box, part number PS3510711, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
HARNESS BURNER BOX
$118.81
Special Order
John
July 7, 2023
Thank you for your quick response. You have referred to this part as a Harness Burner Box - p#PS3510711. In looking at the manuel for GE Monogram they refer to a Switch Harness - p#WB24K10084. Could this be the same part?
For model number ZGP364LDR5SS
Hi John, thank you for reaching out. Yes, the part numbers you provided are for the same part. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the ZGP364LDR5SS
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I broke the frame gate assembly by sitting on it. I ordered a new on and put it on. No tools required
I threw the old frame away and placed the new one on top of the stove
Parts Used:
-
William from UPPR MARLBORO, MD
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy, slow convection fan motor
Used the schematic on the website to order part and disassemble/reassemble with new fan motor. Works like new.
Parts Used:
-
Doug from RED FE LKS, CO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The electrode had broke
I unscrewed the base where the electrode was attached to detached the electrode detached the wire to the electrode inserted new electrode with holding spring and clamp attached wire to electrode.
I then put the base back on top and screwed in the two screws assembled the remaining parts and turned on the stove unit and it worked I am ... Read more very happy.
I then put the base back on top and screwed in the two screws assembled the remaining parts and turned on the stove unit and it worked I am ... Read more very happy.
Read less
Parts Used:
-
O.Robert from Montrose, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!