Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ZET938WF6WW

ZET938WF6WW General Electric Wall Oven - Overview

Get Parts and Repair Help for ZET938WF6WW

If you know the wall oven repair part you need, you can browse the list of all parts on the ZET938WF6WW, or you can search by name or part description. You can also find your part by where it is located on the ZET938WF6WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.86

Oven Sensor

The function of the oven sensor is to detect the temperature within the oven cavity. If you notice that the oven is too hot or too cold, or it is not heating evenly, you may need t...

$2.12

Screw

This screw is sold individually.

$19.14

Broiler Pan - Large

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain....

$3.42

Screw

Sold Individually.

$10.43

Halogen Lamp - 35 Watt

$73.24

Window Pack Assembly

$3.60

Screw

Sold Individually.

$60.12

Broil Element

This broil element is found on the roof of the oven.

$50.94

Convection Element

$30.70

Door Gasket

This oven door gasket prevents heat from escaping the oven cavity when in use.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven was not coming up to temperature

  • Customer: Sean from Highlands Ranch, CO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 36 of 41 people found this instruction helpful
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very e... read more

Replace failed fan in control box

  • Customer: David from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 23 of 24 people found this instruction helpful
After turning off the breaker to cut power to the oven, I opened the oven door and, using the PartSelect exploded diagram as a guide, I removed 3 screws from the underside of the control panel - I was then able to slide the panel up and out to remove it. Leaving all of the control wires (especially the ribbon) connected to control panel, I saw the fan assemb... read more

Aluminum Foil Bonded With Bottom

  • Customer: Linda from Oro Valley, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 19 of 20 people found this instruction helpful
It was much easier than trying to remove the bonded aluminum foil from the false bottom/drip pan. Simply lift and remove oven front door, (see your manual), slide out false bottom and slide in new. For me it did take longer than 15 minutes, but that's because I was doing a thorough oven cleaning. The part was in the $50 range and well worth it. Why didn't an... read more