This halogen light bulb is a genuine OEM component designed for top-mounted lighting in wall ovens and ranges. Operating at 120 volts and 40 watts, it emits a clear, warm white light (approximately 2700K) to illuminate the oven cavity during cooking. The G9 base features two looped pins spaced 9mm apart, ensuring a secure fit in high-heat...Read more environments. Built to withstand elevated temperatures, this bulb enhances visibility inside the oven without compromising performance. Installation should be done with the power off, and the bulb should not be handled with bare hands to prevent damage. Always verify compatibility before purchasing.
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.
This oven temperature sensor assembly is a precision component designed to monitor and regulate the internal temperature of select wall ovens, ranges, and microwave-oven combinations. It continuously communicates with the control board, sending real-time temperature data to ensure the oven maintains the set cooking temperature. A malfunct...Read moreioning sensor may result in inaccurate heating, temperature fluctuations, or premature cycling of heating elements. Replacing the sensor restores consistent performance and accurate cooking results. Installation typically involves disconnecting power, accessing the rear or interior of the oven cavity, and securing the sensor in place. Common symptoms of a faulty sensor include inconsistent temperatures, error codes, and extended cooking times.
Maintain safe and consistent oven performance with this genuine cooling fan sensor board. This electronic component monitors the cooling fan’s speed and communicates with the main control board to prevent overheating, ensuring accurate temperature regulation during baking and broiling. Ideal for resolving issues such as error codes, overh...Read moreeating, or inconsistent temperatures, this replacement part is engineered for reliability and precise operation. Installation involves disconnecting power, removing the old board, and securing the new one in place for proper functionality.
This genuine OEM cooling fan assembly is designed for select wall ovens, ranges, and microwave/oven combinations to maintain proper airflow and prevent overheating during cooking. By circulating air and venting excess heat, it protects internal components such as wiring and electronics, ensuring safe and efficient operation while extendin...Read moreg the appliance’s lifespan. If your oven is overheating, the fan isn’t running, or you’re seeing error codes like F97, replacing the cooling fan can restore reliable performance. Installation is simple—disconnect power, remove the old fan, and secure the new assembly in place.
This part is the replacement rack guide nut for your range. It is made of metal and is sold individually. The rack guide nut helps secure the rack guide screw. The main reason you would need to replace this part is if it is badly stripped or if the nut itself is missing. This is an authentic OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection oven fan and door light not working
18 of 22 peoplefound this instruction helpful.
Michael from Albuquerque, NM
Really Easy
30 - 60 mins
Nutdriver
The first step was to determine whether the problem was with the fan itself or the switch. I did this by opening the back cover and using a Volt meter to verify that the fan was not getting power. (I could have skipped this step.)
Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two he
... Read morex head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.
Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Read less
Was this helpful?
Thank you for voting!
A burnt out bulb
12 of 20 peoplefound this instruction helpful.
George from PALM COAST, FL
Really Easy
Less than 15 mins
Screw drivers
After opening the Oven door, I removed the glass cover to view and locate the bulb, at the inside, top front of the Oven. Removed the burnt out bulb by pulling it in a forward motion towards the front of the Oven, slid the new bulb into place and the Oven is again functional.
Was this helpful?
Thank you for voting!
The oven would not hold an even temperature.
7 of 7 peoplefound this instruction helpful.
Jack from Bremerton, WA
Really Easy
Less than 15 mins
Screw drivers
I used a Trox bit to remove one screw, replaced the oven sensor and reinstalled the screw. The whole project took less than 5 minutes.