ZDP486NRN1SS General Electric Range - Overview

Diagrams for ZDP486NRN1SS

See every part. Know exactly what you need.

Parts for the ZDP486NRN1SS

$30.53

Temperature Sensor

★★★★★

(56)

Part #WB21X22134

The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is havi...Read more

Read less

$16.05

Door Handle Fastener

★★★★★

(11)

Part #WR01X11007

This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.

$16.05

Screw

★★★★★

(1)

Part #WR01X10590

This refrigerator door handle mounting screw connects your refrigerator door to the handle. The part is less than 1 inch in length, and can come in both silver and gold colors. When installing this screw, make sure to avoid cross-threading and use reasonable torque to avoid damage to components. This part is an OEM part sourced directly from the manufacturer. This part is sold individually.

$64.77

Terminal Block Kit

★★★★★

(13)

Part #WB17T10011

This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$16.28

Range Foot Grate

★★★★★

(1)

Part #WB02K10364

$52.47

Burner Cap (18k)

Part #WB29X43469

This burner cap replaces a worn or discolored cap on high-output burners, helping ensure even heat distribution and reliable cooking performance. Designed for 18,000-BTU burners, it’s a direct drop-in replacement and requires no tools for installation. The cap restores both the look and efficiency of the cooktop and is sized at roughly fo...Read more

Read less

$27.36

Halogen Lamp

Part #WB25T10064

$168.51

GRATE

Part #WB31K10252

This single surface burner grate provides a stable and durable platform for cookware, ensuring even heat distribution and reliable performance during cooking. Crafted from resilient cast iron, it features a matte gray finish that enhances the appearance of the cooktop while simplifying cleaning. Designed for easy installation, this grate ...Read more

Read less

$21.86

Orifice Spud - LP - Right Front - Simmer

Part #WB28T10118

$18.59

NUT

Part #WB02T10017

$39.43

HUB BLADE Assembly

★★★★★

(1)

Part #WB02T10289

$15.00

Screw

Part #WB01T10104

Questions And Answers for ZDP486NRN1SS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Barbara - For model number ZDP486NRN1SS

July 10, 2026

Oven won't turn on gas burner on top work

Hello Barbara, thank you for reaching out. If your stovetop gas burners are working normally but the oven won't turn on or heat up, the issue is most likely with the oven relay board. It can cause this issue if the bake relay fails and stops supplying power to the igniter and gas valve circuit, preventing the igniter from heating and the safety valve from opening. The top burners may still operate normally because they use a separate circuit. You may need to replace it. The part number is PS3486573. We hope this helps!

$319.78

Relay Board Assembly

Was this helpful?

Common Symptoms of the ZDP486NRN1SS

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Element will not heat

Little to no heat when broiling

Fixed by
these parts

Show All

Door won’t open or close

Fixed by
these parts

Show All

Videos related to the ZDP486NRN1SS

Watch our pros, then fix it yourself.

Replacing the Temperature Sensor

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven would go in to a F2 Error

148 of 226 people found this instruction helpful.

Peter from stamford, CT
Really Easy
15 - 30 mins
Nutdriver

Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.

Was this helpful?

terminal block melted

56 of 77 people found this instruction helpful.

jonathan from willow springs, IL
Easy
Less than 15 mins
Nutdriver, Screw drivers

The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. U ... Read more

Read less

Was this helpful?

Oven wouldn't preheat above 300 degrees

54 of 95 people found this instruction helpful.

Gerald from Cape Canaveral, FL
Really Easy
15 - 30 mins
Nutdriver

Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.

Was this helpful?