Models
>
ZDP484NGP3SS
ZDP484NGP3SS General Electric Range - Overview
Sections of the ZDP484NGP3SS
[Viewing 11 of 11]Keep searches simple, eg. "belt" or "pump".
![Temperature Sensor – Part Number: WB21X22134 Temperature Sensor – Part Number: WB21X22134](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/10059162-1-S-GE-WB21X22134-Temperature-Sensor.jpg)
Temperature Sensor
PartSelect #: PS10059162
Manufacturer #: WB21X22134
The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature ...
$38.48
In Stock
![Screw – Part Number: WR01X10590 Screw – Part Number: WR01X10590](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/1020128-1-S-GE-WR01X10590-Screw.jpg)
Screw
PartSelect #: PS1020128
Manufacturer #: WR01X10590
This refrigerator door handle mounting screw connects your refrigerator door to the handle. The part is less than 1 inch in length, and can come in both silver and gold colors. When installing this sc...
$8.06
In Stock
![Ignitor Mounting Screw – Part Number: WB1X1293 Ignitor Mounting Screw – Part Number: WB1X1293](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/234519-1-S-GE-WB1X1293-Ignitor-Mounting-Screw.jpg)
Ignitor Mounting Screw
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
In Stock
![Terminal Block Kit – Part Number: WB17T10011 Terminal Block Kit – Part Number: WB17T10011](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/953027-5-S-GE-WB17T10011-Terminal-Block-Kit.jpg)
Terminal Block Kit
PartSelect #: PS953027
Manufacturer #: WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$56.72
In Stock
![Screw – Part Number: WB01K10002 Screw – Part Number: WB01K10002](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/221932-1-S-GE-WB01K10002-Screw.jpg)
Screw
PartSelect #: PS221932
Manufacturer #: WB01K10002
Size: 8-32 inch Sold individually.
$20.93
In Stock
Questions And Answers for ZDP484NGP3SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the ZDP484NGP3SS
[Viewing 7 of 7]Little to no heat when baking
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/10059162_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/234519_1_s.jpg)
Show All
Oven not heating evenly
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/10059162_1_S.jpg)
Show All
Oven is too hot
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/10059162_1_S.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/10059162_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/953027_5_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/1022004_1_S.jpg)
Show All
Element will not heat
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/10059162_1_S.jpg)
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/953027_5_S.jpg)
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/10059162_1_S.jpg)
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
![Fixing](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/assets/PartImages/11725182_1_S.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would go in to a F2 Error
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
Parts Used:
-
Peter from stamford, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
142 of 204 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. U
... Read more
nscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Read less
Parts Used:
-
jonathan from willow springs, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
53 of 67 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't preheat above 300 degrees
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
Parts Used:
-
Gerald from Cape Canaveral, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
48 of 76 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!