ZDP304NP8SS General Electric Range - Overview

Diagrams for ZDP304NP8SS

See every part. Know exactly what you need.

Parts for the ZDP304NP8SS

$30.53

Temperature Sensor

★★★★★

(56)

Part #WB21X22134

The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is havi...Read more

Read less

$16.05

Screw

★★★★★

(1)

Part #WR01X10590

This refrigerator door handle mounting screw connects your refrigerator door to the handle. The part is less than 1 inch in length, and can come in both silver and gold colors. When installing this screw, make sure to avoid cross-threading and use reasonable torque to avoid damage to components. This part is an OEM part sourced directly from the manufacturer. This part is sold individually.

$16.05

Range Screw

Part #WB1K5062

$16.28

Range Foot Grate

★★★★★

(1)

Part #WB02K10364

$45.32

Range Electrode Top

Part #WB13T10065

This surface burner spark electrode is designed to ignite a gas burner by producing a reliable spark when the control is turned on. It helps restore proper burner operation when there is no spark, a weak spark, delayed ignition, or continuous clicking. This component plays a key role in safe and consistent burner lighting for everyday cooking.

$52.47

Burner Cap (18k)

Part #WB29X43469

This burner cap replaces a worn or discolored cap on high-output burners, helping ensure even heat distribution and reliable cooking performance. Designed for 18,000-BTU burners, it’s a direct drop-in replacement and requires no tools for installation. The cap restores both the look and efficiency of the cooktop and is sized at roughly fo...Read more

Read less

$16.05

Mounting Screw

★★★★★

(1)

Part #WB1X5364

This screw is less than 1/2 inch in length. It is sold individually.

$27.36

Halogen Lamp

Part #WB25T10064

$168.51

GRATE

Part #WB31K10252

This single surface burner grate provides a stable and durable platform for cookware, ensuring even heat distribution and reliable performance during cooking. Crafted from resilient cast iron, it features a matte gray finish that enhances the appearance of the cooktop while simplifying cleaning. Designed for easy installation, this grate ...Read more

Read less

$33.69

Screw

Part #WB01K10002

Size: 8-32 inch Sold individually.

$16.23

SPRING IGNITER

Part #WB09T10011

$18.59

NUT

Part #WB02T10017

Questions And Answers for ZDP304NP8SS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Michel - For model number ZDP304NP8SS

December 19, 2024

After an Auto Clean, gas does not flow at all to the cooktop to any of the 4 burners. It's like a protection switch was activated by the auto clean but not disactivated when cleaning was completed.

Hi Michel, Thank you for your question. When the oven does a self-clean the oven temperatures can reach 900 degrees F. This may have shorted the high limit thermostat found behind the back panel of the oven. The part number for the high limit switch is PS2353546. We hope this helps!

$56.95

High Limit Switch

Was this helpful?

Michel - For model number ZDP304NP8SS

December 27, 2024

I asked a question last week about the situation where, after an auto clean, gas does not flow at all to the cooktop to any of the 4 burners. It's like a protection switch was activated by the auto clean but not disactivated when cleaning was completed. On your answer, you mentioned that this may have shorted the high limit thermostat found behind the back panel of the oven. The part number for the high limit switch is PS2353546. I bought the high limit switch from you guys and I just installed it. Still does not work. While I had the range open, I tested the old limit switch for continuity and everything seemed to be OK. So the limit switch was not the problem since the beginning. Any other idea on wat the problem might be ? Thanks.

Hello Michel, Thank you for your inquiry. The other parts to check would be the temperature sensor, the transformer, and also check for any blockages or loose wiring connections. We hope this helps.

$93.04

TRANSFORMER

$30.53

Temperature Sensor

Was this helpful?

Common Symptoms of the ZDP304NP8SS

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Element will not heat

Little to no heat when broiling

Fixed by
these parts

Show All

Videos related to the ZDP304NP8SS

Watch our pros, then fix it yourself.

Replacing the Temperature Sensor

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven would go in to a F2 Error

148 of 226 people found this instruction helpful.

Peter from stamford, CT
Really Easy
15 - 30 mins
Nutdriver

Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.

Was this helpful?

Oven wouldn't preheat above 300 degrees

54 of 95 people found this instruction helpful.

Gerald from Cape Canaveral, FL
Really Easy
15 - 30 mins
Nutdriver

Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.

Was this helpful?

I kept getting An F2 error and the temperature did not seem accurate

29 of 38 people found this instruction helpful.

Chad from Bloomington, IN
Really Easy
Less than 15 mins
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

1) pull out the stove
2) remove the 7 sheet metal screws holding the back panel on. (the panel that also covers where the cord splits and connects to the oven.
3) Find the small plastic connector located in the middle of the back of the range and unplug it.
4) open the front of the oven and remove the one screw holding in ... Read more

Read less

Was this helpful?