EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

XB625RK4SS General Electric Range - Overview

Diagrams for XB625RK4SS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Surface Burner Switch - 8 Inch - 2500W – Part Number: WB24T10025
$54.95
On Order
Surface Burner Switch - 8 Inch - 2500W
★★★★★
★★★★★
(66)
Part #WB24T10025
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to change the heat intensity. The knob to adjust the heat setting mounts on the shaft of this swtich. The burner knob is sold separately. If your large surface element will not turn on, or you cannot adjust the heat intensity, you may have a broken or damaged surface burner switch. Be sure you disconnect your range from the power source before you begin this repair.
Temperature Sensor – Part Number: WB21X22134
$30.53
In Stock
Temperature Sensor
★★★★★
★★★★★
(56)
Part #WB21X22134
The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is having difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor. Before you make this repair remember to unplug your range from the power source, and turn off the gas shut off valve.
Light Bulb - 40W – Part Number: 40A15
$21.95
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(10)
Part #40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
CONTROL OVEN TO9 – Part Number: WB27X45466
$152.35
In Stock
CONTROL OVEN TO9
★★★★★
★★★★★
(67)
Part #WB27X45466
This electronic control board is the central component of your wall oven, managing functions such as temperature regulation and heating elements. The manufacturer has modified the wiring on this part, so professional installation may be necessary for proper setup. Before installation, shut off the circuit breaker or unplug the oven for safety. This genuine OEM part ensures optimal oven performance and compatibility with select models.
REAR SUPPORT – Part Number: WB02X33180
$16.05
In Stock
REAR SUPPORT
★★★★★
★★★★★
(23)
Part #WB02X33180
This genuine GE drawer support is an original replacement part sourced from the manufacturer and is designed for use with electric ranges. Made of durable plastic, it attaches to the rear of the drawer and provides stable support by securing the rear side in place. This part includes the necessary mounting screw for installation and is sold individually. It’s a simple yet essential component for maintaining smooth drawer operation and proper alignment.
Range Oven Door Gasket – Part Number: WB04T10086
$55.21
In Stock
Range Oven Door Gasket
★★★★★
★★★★★
(13)
Part #WB04T10086
The oven door gasket creates a seal between the oven door and the opening of the oven to prevent heat from escaping when the oven is closed.
RECEPTACLE PUSH-IN – Part Number: WB08T10026
$16.47
In Stock
RECEPTACLE PUSH-IN
★★★★★
★★★★★
(9)
Part #WB08T10026
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Screw – Part Number: WH2X930
$16.05
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WH2X930
This screw is sold individually.
Window Pack Assembly – Part Number: WB56X22160
$311.77
In Stock
Window Pack Assembly
★★★★★
★★★★★
(24)
Part #WB56X22160
This window pack assembly, also known as inner door glass, is supplied directly by the manufacturer for use in range ovens. It has measurements of approximately 22 inches by 14 inches. The inner door glass is situated between the outer door panel and the oven cavity. It acts as a barrier between the heat generated by the oven and the external environment. This provides insulation and protection while allowing users to easily view the oven cavity. It is made of tempered glass and is resistant to high temperatures and thermal shock. If the inner door glass becomes damaged or cracked, heat will escape from the oven, you may be unable to see the contents of the oven and the risk of injury will be increased.
Light Cover – Part Number: WB36X192
$26.39
In Stock
Light Cover
★★★★★
★★★★★
(10)
Part #WB36X192
This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. Disconnect power to your appliance before this repair. It is recommended to check the light bulb while the lens cover is removed in case it needs to be replaced. Be sure to remove all broken glass, if applicable, before installing new lens. This part is sourced directly from the genuine manufacturer, and is sold individually.
Front Drawer Support – Part Number: WB48T10013
$16.05
In Stock
Door Pad – Part Number: WB01T10026
$16.05
In Stock
Door Pad
Part #WB01T10026
This is the door pad only. The trim is sold separately.

Common Symptoms of the XB625RK4SS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would go in to a F2 Error
148 of 226 people found this instruction helpful.
  • Peter from stamford, CT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
Was this helpful?
Thank you for voting!
Blown Oven Control Board
56 of 64 people found this instruction helpful.
  • Julien from Barnhart, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and neede d to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
Was this helpful?
Thank you for voting!
Burner was constantly at high heat
46 of 51 people found this instruction helpful.
  • Rick from Avon Park, FL
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I removed the rear cover from the stove then removed the knob and two screws on the front panel that hold the control in place. I then took the wires off the old control one at a time and placed them on the new control. Then I placed the control in position and tightened the two screws on the front panel, replaced the knob and screwed t he back panel in place.
Was this helpful?
Thank you for voting!