WYK-100-1 Walbro Engine - Overview

It is a genuine replacement component which is supplied directly from the original equipment manufacturer for use with Walbro carburetors. This special gasket provides an air-tight seal for the pump, please make sure to check appropriate diagrams of your unit for the correct location and use of this item. Over time gaskets tend to deterio...Read morerate and may crack eventually requiring replacement to ensure peak performance. It is a high-quality part which is made of composite material and it is sold individually.

This carburetor rebuild kit, also known as a repair kit, is designed for small engine carburetors. It is an OEM kit that includes the various gaskets and diaphragms necessary to rebuild and restore the carburetor. The kit includes a needle valve, to regulate fuel flow to the carburetor from the float chamber, a needle lever to control air...Read moreflow to the carburetor throat; and reeds, which ensure that fuel and air do not flow back from the crankcase ino the carburtor. The gaskets included are a metering cover gasket to seal the area between the metering cover and the carburetor body; a diaphragm gasket to allow proper fuel and air flow; a valve seat gasket to prevent fuel leakages between the needle valve seat and the carburetor body; a pump cover gasket to prevent pressure loss; a welch plug to seal small areas in the carburetor body; and a mesh screen to prevent dirt, debris, and other contaminants from entering the carburetor. This kit is specially designed to allow you to fix your carburetor performance issues at once.

This is a genuine manufacturer approved replacement part designed for use with Walbro carburetors. This swivel kit allows user to adjust the tension on the cable bracket. It includes a metal swivel, clip, and plastic washer. To complete this repair you would need a flathead screwdriver and pliers.

This is a genuine Walbro replacement part manufactured for use with carburetors. This gasket is used to seal the diaphragm and carburetor body. It is recommended to replace the gasket when servicing the carburetor to ensure a good seal when the carburetor is reassembled. The gasket is sold individually, please see model diagram for associative parts.

It is a genuine item that is supplied by the original equipment manufacturer for use with Walbro carburetors which are commonly installed on a variety of lawn and garden equipment. This is an identical replacement for a missing or a faulty inlet needle that was originally installed on a new unit. Please make sure to refer to the appropria...Read morete diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality inlet needle valve is made of durable metal and is sold individually.